Corvair Forum

Hi fellows and thank you for all the good info. I have already figured out how we can do it. I would have to go back to regular exhaust manifold to give me the space in the wheel well.
I have a friend of mine that does mandrel bending and he says it should not be a problem because the pipes is not ...

Would anyone have an idea how the exhaust is setup on the super
spider from under the fender or have pics?
Wow! that was a fast responds. I guess the spider being a concept car their is not to much info on it so I guess I'm on my own with the design work and fabrication.

Hi fellows good morning of the day to ya. I'm playing around with my carbs again. I was using the 4 primary carb setup which worked quite well except she was running a little on the rich side and she past everything but a gas station... ::-): . I have gone back to my 2 primary's and 2 secondaries ...

Hi fellows. spent some time in the hospital so I haven't had much time to play around on the net. I'm at home now an playing around with my vair. One of my seals on my axle is leaking and I'm wondering if i is a good idea to change bearings as well.

We had it on the hoist today started it up and she sounded like a coffee grinder.... :eek: The sound came from the transmission. I have an other transmission but I have to identify it first. The numbers on the transmission that I can find is USE HYPOID LUBE, GM2 3858954, on the cover GM 3859956 A P ...

Hi fellows,
How can you tell if a manual transmission is a 4 speed?

Good morning fellows,
I'm having trouble connecting my head temp gauge. Do you think I can remember if the connection is out of the harness near the coil or the wires coming out of the drivers side shroud. Haven't had a chance to crawl under to see yet...

This is what she sounds like

Thanks Brad, this will help.

Hi fellows, My speedometer works but my odometer does not, any ideas?

This installation is from Rafee and it shows the pump instalation and the fuel line cutting and re-rutting.
http://corvairone.com/elecfuelpumpinst.htm#1" onclick="window.open(this.href);return false;"

Would anyone know how many wires run to the engine compartment electrical harness. the reason I'm asking is I'am installing a twist lock stainless connector and I have to know how many pins I need.

Hi Fellows, I have to install a new coil for my electronic ignition and I can't remember how the wires from my harness are hooked up. I have a brown and yellow hooked together and a white which has power.
Thanks

She is finely on the road, still a lot of tweaking to do. This will be one of the most unusual Corvair engines around.... ::-):
This is Corvair One's New Look.
New look 600.JPG
Fancy aluminum oil pan for better heat dissipation.
Oil Pan 600.jpg
More fancy aluminum stuff.
Valve Covers 600 ...

Hi Stephan, if you want to run cooler install water and alcohol injection system. I'm having one built by Snow Performance for mine.
These vents are being installed on mine and will be eventually electrically operated and will be based on temperature.

vents.jpg
This is my ariginal carb setup ...

Hi Stephan, here is my setup. Velocity stacks.