Looking for some Weber 40dcoe base line info

All Models and Years
Post Reply
Alexrobic604
Posts: 72
Joined: Wed Nov 12, 2014 7:22 am
Location: Canada B C

Re: Looking for some Weber 40dcoe base line info

Post by Alexrobic604 »

Float setting is 12mm between float and gasket, 25 mm on the drop measure at the middle of the float to the gasket is what my book says. My top end is good from 2500 rpm up, it's just don't wanna start or idle. To rich I think exhaust is black.
62 Corvair Monza 900 Convertible
Top
Post Reply

Return to “Ask your Mechanical Questions here”