
JC's '67 500 coupe
Re: JC's '67 500 coupe
Driving helps too. Take it for a spin. 

Scott
1960 Monza Coupe
1965 Evening Orchid Corsa Turbo (project)
1961 Rampside (project)
1964 Spyder coupe (patina car, running)
1964 faux Spyder (project/parts car)
1964 Monza (parts car)
1963 Monza (parts car)
1960 Monza Coupe
1965 Evening Orchid Corsa Turbo (project)
1961 Rampside (project)
1964 Spyder coupe (patina car, running)
1964 faux Spyder (project/parts car)
1964 Monza (parts car)
1963 Monza (parts car)
Re: JC's '67 500 coupe
Well, I need to bleed the brakes a bit more before taking a spin around the 'hood
But I think the MMO is starting to work its magic....I took this video and on the next start the loudest lifter has quieted
Still seems a bit loud at the driver's side valve cover, though, and it seems to need a general tuneup (hear the missing in the video?) but it's encouraging!
Hopefully the big brown truck has my floor pans tomorrow, I have 3 days off to get started on that job. Got confirmation that the rear wiring harness shipped today also! I'm stoked!

But I think the MMO is starting to work its magic....I took this video and on the next start the loudest lifter has quieted

Hopefully the big brown truck has my floor pans tomorrow, I have 3 days off to get started on that job. Got confirmation that the rear wiring harness shipped today also! I'm stoked!

67 500 Coupe | 65 Crown parts car | 69 GTO | 51 Ford 8N | 56 Ford 850 | 85 Honda Nighthawk 700S | 96 Honda XR250R
Re: JC's '67 500 coupe
Started the floorboard project today, got most of the passenger side out. I think I inhaled most of the rust dust
funny how the galvanized supports stay so nice, as the floorboards rot right off the top of them! Most of the spotwelds weren't that great, either.

I guess the shifter comes off from underneath? Gonna need to pull that pretty quick. These Clark's floorboards seem to be pretty nice!


I guess the shifter comes off from underneath? Gonna need to pull that pretty quick. These Clark's floorboards seem to be pretty nice!
67 500 Coupe | 65 Crown parts car | 69 GTO | 51 Ford 8N | 56 Ford 850 | 85 Honda Nighthawk 700S | 96 Honda XR250R
Re: JC's '67 500 coupe
Finally making some progress again, sold my Roadrunner which was consuming the garage, got the 'vair in there last weekend. Brakes are all bled and working properly. Pulled the gas tank- it's toast. Have a new one from Clark's here. Got the car tagged and insured (that's motivational!). Got the proper 'bulge' lug nuts for the Z/28 wheels. Hopefully start tackling the new gas tank install tomorrow night 

67 500 Coupe | 65 Crown parts car | 69 GTO | 51 Ford 8N | 56 Ford 850 | 85 Honda Nighthawk 700S | 96 Honda XR250R
- Am-Iron
- Corvair of the Month
- Posts: 427
- Joined: Sun Apr 25, 2010 7:15 am
- Location: Colorado Springs, Co.
- Contact:
Re: JC's '67 500 coupe
Great progress! Keep it going. How was the trunk floor?
Check out my FB Page! http://www.facebook.com/pages/Corvair-O ... 0804308827" onclick="window.open(this.href);return false;
Re: JC's '67 500 coupe
Trunk floor is good! Trunk lid is not so good.
Got the gas tank in today, minus sender- float turned out to be cracked. Bah! Pulled the belly pan, got the clutch cable back on its pulley. Checked power at the fuse block, still don't know why it starts and runs, but I have no headlights, turn signals, or dash lights. All I have is brake lights. Suspect mice.
Got the gas tank in today, minus sender- float turned out to be cracked. Bah! Pulled the belly pan, got the clutch cable back on its pulley. Checked power at the fuse block, still don't know why it starts and runs, but I have no headlights, turn signals, or dash lights. All I have is brake lights. Suspect mice.
67 500 Coupe | 65 Crown parts car | 69 GTO | 51 Ford 8N | 56 Ford 850 | 85 Honda Nighthawk 700S | 96 Honda XR250R
Re: JC's '67 500 coupe
Got the new sender float from LS Corvairs today (thanks!) and got the sender installed. Just need gas!
Checked all the fuses, found that the wiper motor does work, sorta....doesn't really park, and seemed to slow down the more I ran it :/ I can hear the washer pump kicking in. A new fuse gave me dash lights, but the H/L switch is apparently pretty crusty after sitting 20 some years. Horn works, radio doesn't, fan blower works, turn signals were missing the flasher...and the front turn signal bulbs are corroded into the sockets, groan. Replaced one obviously smoked low beam, but still no headlights. Maybe high beam switch?
Also got a pair of used 195/60-15s for the front, they fit pretty good!
Parts coming in the next couple days: roof rail, door, and quarter window weatherstrips, door window channel liners, and proper battery cabling.
Gotta get the front seat out and finish the floorboard project!
Checked all the fuses, found that the wiper motor does work, sorta....doesn't really park, and seemed to slow down the more I ran it :/ I can hear the washer pump kicking in. A new fuse gave me dash lights, but the H/L switch is apparently pretty crusty after sitting 20 some years. Horn works, radio doesn't, fan blower works, turn signals were missing the flasher...and the front turn signal bulbs are corroded into the sockets, groan. Replaced one obviously smoked low beam, but still no headlights. Maybe high beam switch?
Also got a pair of used 195/60-15s for the front, they fit pretty good!
Parts coming in the next couple days: roof rail, door, and quarter window weatherstrips, door window channel liners, and proper battery cabling.
Gotta get the front seat out and finish the floorboard project!
67 500 Coupe | 65 Crown parts car | 69 GTO | 51 Ford 8N | 56 Ford 850 | 85 Honda Nighthawk 700S | 96 Honda XR250R