Center consoles from other cars
Center consoles from other cars
I'd be interested to see some pictures if you guys used center consoles from different vehicles.
I know I can buy one from Clark's or California but that will be $200 shipped while I can find something at the scrap yard for 10 bucks.
So if you guys found some that look good and fit well, post them up!
I know I can buy one from Clark's or California but that will be $200 shipped while I can find something at the scrap yard for 10 bucks.
So if you guys found some that look good and fit well, post them up!
1965 Corvair Monza coupe
Re: Center consoles from other cars
This has been cover in other post. just go to the board index. under modifications then under interior. then search center console
Don Howard
Lake City Fl.
66 140 Convertible
Lake City Fl.
66 140 Convertible
Re: Center consoles from other cars
There isn't much in terms of sourcing other cars, especially modern ones.
1965 Corvair Monza coupe
- tommy44432
- Posts: 180
- Joined: Mon Mar 10, 2014 3:32 pm
- Location: Lisbon, Ohio
- Contact:
Re: Center consoles from other cars
I have a '63 Chevy ll Nova SS and didn't like the chrome plated "console" on the floor and none I found aftermarket worked for me so I bought some quarter inch thick poplar sheets and made my own...complete with cupholders and a compartment for holding stuff. Used a simple terry cloth towel as padding and covered it with some Madrid grain vinyl used in the day I bought from an upholstery supply house. It looked great when finished and have had several people build their own after seeing mine. Give it a try.
Re: Center consoles from other cars
I don't really have skills for that, although I'd love to see a pic.
At the scrap yard, I've seen some Ford Ranger/Mazda B-series and Ford Windstar consoles that may have worked but they were either in poor shape or not black. Which leads me to the question - any of you know of a dye or paint that would work on vinyl and/or leather in high "traffic" areas?
I was trying to find a Caliber console as they seem to fit nice and are often black but that car is still rare here at scrap yards.
At the scrap yard, I've seen some Ford Ranger/Mazda B-series and Ford Windstar consoles that may have worked but they were either in poor shape or not black. Which leads me to the question - any of you know of a dye or paint that would work on vinyl and/or leather in high "traffic" areas?
I was trying to find a Caliber console as they seem to fit nice and are often black but that car is still rare here at scrap yards.
1965 Corvair Monza coupe
- terribleted
- Posts: 4584
- Joined: Sun Apr 18, 2010 2:36 pm
- Location: Atlanta, GA
- Contact:
Re: Center consoles from other cars
For vinyl and plastic try some Plastikote Vinyl dye/paint. Works good on vinyl and adheres to most plastics as well. Available in spray cans.
Corvair guy since 1982. I have personally restored at least 20 Vairs, many of them restored ground up.
Currently working full time repairing Corvairs and restoring old cars.
https://www.facebook.com/tedsautorestoration/
Located in Snellville, Georgia
Currently working full time repairing Corvairs and restoring old cars.
https://www.facebook.com/tedsautorestoration/
Located in Snellville, Georgia
Re: Center consoles from other cars
I'm working on a design of my own with a subwoofer and amp integrated in it for my convertible. I ran a center console from a VW Cabriolet in my Datsun 510. If you can find one I think it may also work in a vair quite nicely.
Scott
1960 Monza Coupe
1965 Evening Orchid Corsa Turbo (project)
1961 Rampside (project)
1964 Spyder coupe (patina car, running)
1964 faux Spyder (project/parts car)
1964 Monza (parts car)
1963 Monza (parts car)
1960 Monza Coupe
1965 Evening Orchid Corsa Turbo (project)
1961 Rampside (project)
1964 Spyder coupe (patina car, running)
1964 faux Spyder (project/parts car)
1964 Monza (parts car)
1963 Monza (parts car)
Re: Center consoles from other cars
Thanks guys, Cabrio would be a tough find. I may have to do some spraying.
1965 Corvair Monza coupe
- bbodie52
- Corvair of the Month
- Posts: 11956
- Joined: Mon Aug 06, 2012 12:33 pm
- Location: Lake Chatuge Hayesville, NC
- Contact:
Re: Center consoles from other cars
I think the source for this console was Jo-Ann Fabric and Craft Stores, Hobby Lobby, Michael's Stores, or some such...
Brad Bodie
Lake Chatuge, North Carolina
1966 Corvair Corsa Convertible
Lake Chatuge, North Carolina
1966 Corvair Corsa Convertible
Re: Center consoles from other cars
OOhhh...KAYYY!!
1964 Monza Spyder Turbo Convertible.
1949 Ford 8N Tractor
2006 Toyota Tacoma TRD Off-Road 4X4 Pickup
1949 Ford 8N Tractor
2006 Toyota Tacoma TRD Off-Road 4X4 Pickup
Re: Center consoles from other cars
Went to another scrap yard. Couldn't find anything decent but my buddy found this aftermarket one in a minivan.
Was black top with grey sides and grey sliding lid. I painted everything black to match. Paid zero dollars for it. :)
Was black top with grey sides and grey sliding lid. I painted everything black to match. Paid zero dollars for it. :)
1965 Corvair Monza coupe