FS: Complete 66 Turbo motor

[pvholgado]

Relisted with modifications and video of motor running on 6/21/24
Turbo long block+
This motor came out of my car running fine- no unusal noises and not leaking any oil. I'm selling it with new Altenator, turbo w/intake manifold, without starter, shrouds, and the YH. I have no other history of this motor as it came without any history or documentation. I ran this motor for approx. 1500 miles with no problems- no oil consumption or overheating. (This motor is located in Central NY 30 miles North of Syracuse. I'm asking $2800 shipping is buyers responsibility.
The turbo is configured as it came from factory- it functions and produced approx. 7 lbs of boost on the motor. The YH also was originally on the motor and it was the carb that resuted in the previously mentioned 7 lbs of boost. Unlike the turbo unit it could use a rebuild. I have an old YH core that I will include- it MAY be usable for parts. Also included are the various oil lines, and pcv line. Shipping not included.
Also included is a Complete (95%) turbo shroud set
The turbo shroud set includes all pieces (incl.top shroud) plus 2 good thermostats (worth $100 by themselves).
This set has the hard to find pieces that surround the exhaust system pipes. It's taken me some time to assemble this set and if you are considering putting in a turbo motor in a non turbo car you will be surprised how rare some of these pieces are. I prefer local pick up as Shipping is not included and will be expensive due to size and shape of parts like the top shroud and side shrouds.

All of these items came from my personal car (except for a few of the shroud pieces) and were operating fine when removed- If interested have a video available of the car running with the old motor.

https://www.dropbox.com/scl/fi/zzywz5wt ... sfyo5&dl=0



I removed it only to replace it with a custom built motor using upgraded components and a turbo upgraded to the b-flow configuration- I have forum members that can vouch for the motor's condition. thanks for looking- Asking $2800

[pvholgado]

bump

[pvholgado]

bump

[pvholgado]

Here is a link to video- I just checked in post it wasn't working- I fixed it but here is another link- Sorry


https://www.dropbox.com/scl/fi/zzywz5wt ... sfyo5&dl=0

[pvholgado]

Check previous post for corrected link to video of engine running.

[pvholgado]

bump

[pvholgado]

bump

[pvholgado]

bump

[pvholgado]

bump