LM Rear Wheel Hub Assemblies Bearings & Seals

[Lane66Monza]

I thought It would be appropriate to post these part numbers for the LM rear hub assemblies, since we had recent discussions on the assembly.

65-69 Vair rear hub assemblies parts

REAR OUTER WHEEL BEARING Timken Set 6 (LM67048/LM67010)

REAR INNER WHEEL BEARING Timken Set 309 (M86649/M86610)

REAR WHEEL BEARING INNER SEAL 3794002: Vendors - 16757 (SKF) / 9178S (Timken or National) / BC35V9 (SKF)

REAR WHEEL BEARING OUTER SEAL 3858096: Vendors - 21650 (SKF) / 9195S (C2C) / NOS21650 (NAPA)

REAR WHEEL BEARING DUST SHIELD 3820238 or 25-104042-1

REAR AXLE YOKE DEFLECTOR 3820241 or 25-104041-1

[erco]

Yup, I bought my Timken bearings off Amazon when I did mine. IIRC I got the seals and shims from Clark's. Def got my hydraulic press at Harbor Freight.

[Lane66Monza]

Those yoke reflectors are hard to find. Right now only Clark's and Ricks Corvette Parts has them. Check prices before ordering, if you have a limited budget.

Early in my Corvair experience., I bought a car set of the $$ Saver bearings my More Door. Next time I took off the right rear hub assembly due to a vibration, I found the bearings were not running true across the entire race. I replaced all those Saver bearing with Timkens bearings. I only buy Timken bearings now

[joelsplace]

Rockauto's pricing on Timkens is usually lower than local Chinese bearings.