Corvair Forum

Plating restoration ?

Sent from my SM-N900W8 using Corvair Forum mobile app

I really struggled with one of the carbs venturi was spiting fuel opened up carb float had a hole replaced float readjusted float reinstalled carb same problem after removing and installing numerous times I check fuel pressure hi fuel pressure fix that problem ok venturi is not leaking so now notice ...

Hey thanks for the recommendation I went with Steve Goodman got the carbs back they work great car sounds and runs amazing I would recommend Steve for carb rebuilding quality work and very helpful once again thanks for the recommendation

Sent from my SM-N900W8 using Corvair Forum mobile app

Rare shalako kit car 

Sent from my SM-N900W8 using Corvair Forum mobile app

Thanks for the feed back going to see if I can source those bolts at the hardware store shipping to canada is getting crazy

Sent from my SM-N900W8 using Corvair Forum mobile app

Sent from my SM-N900W8 using Corvair Forum mobile app

What's the best way to install to insure no leaks

Sent from my SM-N900W8 using Corvair Forum mobile app

I hope so there is a lot of fuel coming out the line I was told that newer fuel could increase the pressure and I was running at 7 psi now iam in between 3 and 4 venturi is not dribbling float is set to spec carbs are a mess getting sent out for a rebuild Sent from my SM-N900W8 using Corvair Forum ...

Success so my original psi was actually 7 don't no why I put 12 anyways I cut two coils of the top that got me down 5 than I cut a quarter more iam at 3 1/2 now which is great because my venturi is not dribbling anymore still need to get these carbs rebuilt Sent from my SM-N900W8 using Corvair ...

How do you tell if it's oem original ac delco

Sent from my SM-N900W8 using Corvair Forum mobile app

I will give it try getting good at taking things apart numerous times and putting it back together

Sent from my SM-N900W8 using Corvair Forum mobile app

It's an ac delco pump I just don't know how much to cut and the spring is cone shaped may be a little from top and bottom

Sent from my SM-N900W8 using Corvair Forum mobile app

This is an old fuel pump I dissected

Sent from my SM-N900W8 using Corvair Forum mobile app

My fuel pressure is running at 12 would like to get around 3 or 4 I heard you can cut the fuel pump spring any feedback would be great Sent from my SM-N900W8 using Corvair Forum mobile app

Corvair underground rebuild carbs price is great anyone got experience with these also looking at wolf enterprise super expensive any feed back would be great

Sent from my SM-N900W8 using Corvair Forum mobile app

Just placed my order there on there way hope I can get to drive my vair by the end of summer once again thanks for the help

Sent from my SM-N900W8 using Corvair Forum mobile app