Page 1 of 1

Center consoles from other cars

Posted: Mon Apr 28, 2014 12:01 pm
by DemonPig
I'd be interested to see some pictures if you guys used center consoles from different vehicles.
I know I can buy one from Clark's or California but that will be $200 shipped while I can find something at the scrap yard for 10 bucks.
So if you guys found some that look good and fit well, post them up!

Re: Center consoles from other cars

Posted: Mon Apr 28, 2014 4:45 pm
by MBlaster1
This has been cover in other post. just go to the board index. under modifications then under interior. then search center console

Re: Center consoles from other cars

Posted: Mon Apr 28, 2014 6:45 pm
by DemonPig
There isn't much in terms of sourcing other cars, especially modern ones.

Re: Center consoles from other cars

Posted: Sat May 03, 2014 5:00 pm
by tommy44432
I have a '63 Chevy ll Nova SS and didn't like the chrome plated "console" on the floor and none I found aftermarket worked for me so I bought some quarter inch thick poplar sheets and made my own...complete with cupholders and a compartment for holding stuff. Used a simple terry cloth towel as padding and covered it with some Madrid grain vinyl used in the day I bought from an upholstery supply house. It looked great when finished and have had several people build their own after seeing mine. Give it a try.

Re: Center consoles from other cars

Posted: Sat May 03, 2014 7:57 pm
by DemonPig
I don't really have skills for that, although I'd love to see a pic.

At the scrap yard, I've seen some Ford Ranger/Mazda B-series and Ford Windstar consoles that may have worked but they were either in poor shape or not black. Which leads me to the question - any of you know of a dye or paint that would work on vinyl and/or leather in high "traffic" areas?

I was trying to find a Caliber console as they seem to fit nice and are often black but that car is still rare here at scrap yards.

Re: Center consoles from other cars

Posted: Sat May 03, 2014 8:11 pm
by terribleted
For vinyl and plastic try some Plastikote Vinyl dye/paint. Works good on vinyl and adheres to most plastics as well. Available in spray cans.

Re: Center consoles from other cars

Posted: Sun May 04, 2014 12:06 am
by Scott H
I'm working on a design of my own with a subwoofer and amp integrated in it for my convertible. I ran a center console from a VW Cabriolet in my Datsun 510. If you can find one I think it may also work in a vair quite nicely.

Re: Center consoles from other cars

Posted: Sun May 04, 2014 12:05 pm
by DemonPig
Thanks guys, Cabrio would be a tough find. I may have to do some spraying.

Re: Center consoles from other cars

Posted: Sun May 04, 2014 3:52 pm
by bbodie52
I think the source for this console was Jo-Ann Fabric and Craft Stores, Hobby Lobby, Michael's Stores, or some such...
Corvair 4-Door Convertible (1).jpg
Corvair 4-Door Convertible (2).jpg
Corvair 4-Door Convertible (4).jpg
Corvair 4-Door Convertible (5).jpg
:rolling: :rolling: :rolling: :rolling: :rolling: :rolling: :rolling: :rolling: :rolling:

Re: Center consoles from other cars

Posted: Sun May 04, 2014 3:59 pm
by Skrain
OOhhh...KAYYY!! :nocomment: :tongue:

Re: Center consoles from other cars

Posted: Sat May 10, 2014 7:13 pm
by DemonPig
Went to another scrap yard. Couldn't find anything decent but my buddy found this aftermarket one in a minivan.
Was black top with grey sides and grey sliding lid. I painted everything black to match. Paid zero dollars for it. :)

Image