The Spousal Avoidance Unit build

[erco]

Beautimous!

[hrm2k]

Thanks
I am pretty stoked at this point. I am still all over the place on color. I am going to seal the car in white ......................I guess I will figure it out then

[erco]

Color-wise, you can't go wrong with "Arrest-Me-Red" or "Come-and-Get-Me-Copper"!

[hrm2k]

First coats of Championship White

[hrm2k]

I got the second heavy coat of white on the car today. The third and final coat of white goes on tomorrow ( Monday 11 - 8 j
Then sanding with 600 grit. Hopefully I wont need to touch up any of the white.
The 4 heavy coats of clear filled with Roth Snocaine metal flake. Then 4 more heavy coats of clear…….then cut and buff

[Scott H]

It’s looking good. Finally coming to fruition!!!

[hrm2k]

Hope it turns out as nice s your Scott !!!!

[hrm2k]

Once again, doing shit that I have no or very limited experience with. I added warm beer metal flake to clear. It sprays real easy. This is just the first coat but you get the idea

Film at 11

[hrm2k]

I did a second coat today. The roof is looking good. THe first picture was about 35% flake coverage. Today's photo is more like 65% flake coverage. I have ordered a bunch more flake....gets here on the 7th of December.

[hrm2k]

Things are going to get real spakly now

[hrm2k]

It has been cold so I haven’t been going to the garage. I went down today to drop off the metal flake and another gallon of paint. When I walked into the garage area and turned on the light, I saw a cool glow………I’m digging this

Film at 11

[doug6423]

That does look different than your previous pictures.

I like it!

[hrm2k]

Third coat today……about 75% coverage…..more to do

Film at 11

[hrm2k]

Happening

Film at 11

[hrm2k]

More flake added, still more to go

[hrm2k]

Did another gallon of clear with metal flake. I’m figuring another 6 or 8 coats of metal flake and then a lot of straight clear

Film at 11