Page 1 of 1
CNC heads at 2025 CONVENTION!!
Posted: Tue May 20, 2025 9:35 am
by 66vairguy
A Corvair buddy at the convention just texted pictures of the looooong rumored CNC Corvair 140HP heads. Yes they are real!!! Later I'll try to get pictures up, unless someone else does.
Re: CNC heads at 2025 CONVENTION!!
Posted: Tue May 20, 2025 10:01 am
by Auto Anatomy
Very excited to see these!
Sean
Re: CNC heads at 2025 CONVENTION!!
Posted: Tue May 20, 2025 10:18 am
by martyscarr
Here's a pic from Instagram
Re: CNC heads at 2025 CONVENTION!!
Posted: Tue May 20, 2025 10:58 am
by Phil Dally
I've known about these for three years but was sworn to secrecy.
The flow bench number are like none you've ever heard of before.
Re: CNC heads at 2025 CONVENTION!!
Posted: Tue May 20, 2025 11:45 am
by Phil Dally
Any questions should be directed to owner Paolo Galli.
They are modular...three heads with a retaining collar.
1st version stock but the CNN will do anything wanted.
Next time out will be Fan Belt in a running Greenbrier.
https://www.instagram.com/billet_corvair_heads_/
(805) 674-3674
You all might just remember his grandfather Bob Galli.
Re: CNC heads at 2025 CONVENTION!!
Posted: Tue May 20, 2025 12:11 pm
by chris
Wow, that is cool! Looking at the open intake ports reminds me of photos I've seen of pre-Weber conversions.
Re: CNC heads at 2025 CONVENTION!!
Posted: Tue May 20, 2025 1:20 pm
by doug6423
I'm guessing they're someone's race car being tested?
Re: CNC heads at 2025 CONVENTION!!
Posted: Tue May 20, 2025 1:58 pm
by Wagon Master
Phil, for the "next time" will a version that can stand more than drag, short course racing be put in the briar?
Re: CNC heads at 2025 CONVENTION!!
Posted: Tue May 20, 2025 2:05 pm
by Phil Dally
Please don't make any assumptions.
Call Paolo with any & all questions.
I'm not authorized to answer them.
Re: CNC heads at 2025 CONVENTION!!
Posted: Tue May 20, 2025 3:36 pm
by 66vairguy
Phil Dally wrote: ↑Tue May 20, 2025 2:05 pm
Please don't make any assumptions.
Call Paolo with any & all questions.
I'm not authorized to answer them.
Hopefully he will post if the cooling area is improved (more power equals more heat) and what the heads weigh.
Anyway ----- an amazing accomplishment and great eye candy.
Re: CNC heads at 2025 CONVENTION!!
Posted: Tue May 20, 2025 6:54 pm
by Phil Dally
Cooling will not be an issue with this current fin design.