Custom Air Cleaners
Posted: Mon Feb 12, 2018 9:06 am
I am looking for someone that has access to a water jet machine to cut our tops and bottoms for oval air cleaners. The oval tops are pretty simple. They are 12.125" long by 6.25" wide. The bottoms are the same dimensions but with two 2.25" diameter holes on 5.590" centers.
I was wanting 3/8" aluminum but would be ok with 1/4" aluminum. The surface could be brushed or polished and the edges finished.
I will be using the WIX 42710 air cleaners.
I already have the velocity stacks made that I will bolt onto the bottoms. The patterns are located in the background to give you an idea of what they will look like.
I was wanting 3/8" aluminum but would be ok with 1/4" aluminum. The surface could be brushed or polished and the edges finished.
I will be using the WIX 42710 air cleaners.
I already have the velocity stacks made that I will bolt onto the bottoms. The patterns are located in the background to give you an idea of what they will look like.