A place to preserve the past, present and future of the Corvair. An ever evolving knowledge base made up of Corvair Enthusiasts from all over the world. (Note: no ads for logged in members).
https://www.corvairforum.com/forum/
I thought about using LEDs but when I started researching bulbs, it was overwhelming with all the choices. Do you have recommendations for the 1156 & 1157 bulbs and flasher? Saving the current of incandescent bulbs would be beneficial in my case.66vairguy wrote:jetcat - If you haven't done it, you might consider changing the tail lamps bulbs to LED. I have all four tail lamps wired as stop and run. All four used about 8Amps. With the running and brake lamp filaments on the four bulbs were using about 10 Amps! The LED's reduced that considerably, to about 1/2 Amp.
Never mind, just saw your post on the LED lights......66vairguy wrote:jetcat - If you haven't done it, you might consider changing the tail lamps bulbs to LED. I have all four tail lamps wired as stop and run. All four used about 8Amps. With the running and brake lamp filaments on the four bulbs were using about 10 Amps! The LED's reduced that considerably, to about 1/2 Amp.
The link says this item has been removed.....