Right Hand Drive Conversion
Right Hand Drive Conversion
Are there any motor works businesses that do conversions of Corvair steering from left hand drive to right hand drive?
Chappy
Chappy
Re: Right Hand Drive Conversion
Definition --- "In countries where one drives on the right-hand side of the road, the cars are built so that the driver sits on the left-hand side of the car. Conversely, driving on the left-hand side of the road usually implies that the driver's seat is on the right-hand side of the car."
So do you want to move the steering wheel and controls from the left side of the car to the right?
So do you want to move the steering wheel and controls from the left side of the car to the right?
Re: Right Hand Drive Conversion
Yes that's correct. The steering would be moved from the left side to the right side.
Re: Right Hand Drive Conversion
Why would you want to move steering? I drive my corsa on the left over here in UK with no problems. Sounds like alot of hard work but if you have or just want to do it good luck keep us updated
Sent from my [device_name] using Corvair Forum mobile app
Sent from my [device_name] using Corvair Forum mobile app
Re: Right Hand Drive Conversion
Here is a 66 re-discovered recently that apparently went through a detailed conversion to RHD many years ago for import to Australia. I've never heard of anyone doing such conversions.
http://corvaircenter.com/phorum/read.ph ... 523,945037
http://corvaircenter.com/phorum/read.ph ... 523,945037
Dave W. from Gilbert, AZ
66 Corsa 140/4 Yenko Stinger Tribute
66 Corsa 140 Coupe w/factory A/C
65 Monza 4DR 140/PG w/factory A/C
65 Monza 4DR EJ20T/5
64 Greenbrier 110/PG, Standard 6-Door
66 Corsa 140/4 Yenko Stinger Tribute
66 Corsa 140 Coupe w/factory A/C
65 Monza 4DR 140/PG w/factory A/C
65 Monza 4DR EJ20T/5
64 Greenbrier 110/PG, Standard 6-Door
Re: Right Hand Drive Conversion
At one time Australia forbid cars on public roads with the steering wheel and controls on the the left, except for parades. There were some impressive conversion companies in Australia and New Zealand at one time. The Corvette magazines would do articles on converted cars in Australia and the workmanship was impressive.
Now that few, if any, cars are manufactured in Australia the laws have changed (I think it was about a five years ago). Not sure if the conversion companies have survived.
Chappy, you might state what country you are in.
Now that few, if any, cars are manufactured in Australia the laws have changed (I think it was about a five years ago). Not sure if the conversion companies have survived.
Chappy, you might state what country you are in.
- Phil Dally
- Posts: 844
- Joined: Thu Dec 10, 2009 4:47 am
Re: Right Hand Drive Conversion
Really nice conversion...cant remember the owners name.
Late model is very hard to do...early models are mirror image.
Late model is very hard to do...early models are mirror image.
-
- Posts: 1604
- Joined: Tue Mar 25, 2014 9:18 pm
- Location: Kalamazoo Mi..
Re: Right Hand Drive Conversion
Didn't most car companies make right hand drive for export??
64Powerglide, Jeff Phillips
Kalamazoo, Mi..
Kalamazoo, Mi..
Re: Right Hand Drive Conversion
Not really. GM has sold the Corvette in the UK as a left hooker. My suggestion would be to find a Rolls Royce restoration expert. Many vintage Royce’s are converted when Americans-buy them and import them into the States. I know Royce’s were built in the US I believe in Springfield but they where made as left hookers.
Sent from my iPhone using Corvair Forum mobile app
Sent from my iPhone using Corvair Forum mobile app
Re: Right Hand Drive Conversion
I'm In Australia and would like to buy a Corvair from USA but think it might be better to have a conversion to RHD done in the US.
Chappy
Chappy
Re: Right Hand Drive Conversion
I've never heard of a RHD conversion done in the U.S.A. As I stated before, many U.S. cars were converted in Australia or New Zealand. Also considering the currency ratio getting it done in the U.S.A. would be expensive in Aussie currency.
I'd suggest contacting clubs in your area that have U.S. cars and see if they can point you to a good conversion specialist in your area. Again a few decades ago that type of work was well done in your part of the world, maybe times have changed.