pensylvania bondo bucket

[mart]

some trunk work going on

[corvairdog]

Nice, you even put the hole in the truck so you can use it as a ice cooler once she's done.

[mart]

Nice, you even put the hole in the truck so you can use it as a ice cooler once she's done.

great idea, it might never drive again , might as well use it for something

[mart]

Engine cleaned up and almost ready to re fit. Hi-vol oil pump to fit, and new valve covers and trans pan on shopping list

[terribleted]

Looking good Mart. Your getting there!!

[flat6_musik]

Very cool, Mart......way to keep plugging away at 'er! I can't wait to see it moving down the road again.

[TikiRalf]

WOW Mart you are going good amazing looks good!!! keep on going and you can hit the road quick!

[TexasUK]

Did you paint the engine? If so, what with?

[mart]

I used a very high temp paint by simonize, supposed to be for manifolds etc, It needs heat curing and is easily rubbed off if not cured. As far as I know its available in black silver and red

[mart]

A little more progress, despite worsening health issues

[mart]

Any one out there have a spare 1966 110 carb they dont need, and can send to uk? I only really need a good bottom half , pref with good spindle. Mine got damaged trying to remove the screws holding the venturi cluster. Clarks are out of stock

[TexasUK]

I might know a couple of people with spares, I'll send them a message and see if they have anything.

Actually, you could try this guy, he said he had a pair with linkage, but obviously I expect he will want to sell them as one lot.
Jonathan Rojas [webmaster@beachbuggy.eu]

[mart]

thanks, I think Rafee has one, so I will probably throw it in with some other parts I need

[mart]

Almost ready to go back in....at last

[bbodie52]

You know, this thing is starting to look like it might actually run! Have you briefed it about running on the wrong side of the road?

Seriously though... vairy impressive!!!

[mart]

It had better run......that Otto 4 carb set up gave me a few headaches.....still a long way to go