selling corvair question

All Models and Years
User avatar
Scott H
Site Admin
Posts: 4197
Joined: Tue Nov 17, 2009 5:21 pm
Location: Hesperia, CA

Re: selling corvair question

Post by Scott H »

Rich, I'd start at $1500.00 since it does run a drive and then let them talk you down some. :tu: Good luck with the sale.
Scott
1960 Monza Coupe
1965 Evening Orchid Corsa Turbo (project)
1961 Rampside (project)
1964 Spyder coupe (patina car, running)
1964 faux Spyder (project/parts car)
1964 Monza (parts car)
1963 Monza (parts car)
User avatar
new mexico vair
Posts: 207
Joined: Mon Oct 18, 2010 10:46 am
Location: Las Cruces, New Mexico

Re: selling corvair question

Post by new mexico vair »

I think it should be worth 1200 or so. That's just off the cuff though.
1964 Monza Corvair
ihwild
Posts: 26
Joined: Sat May 18, 2013 3:40 pm

Re: selling corvair question

Post by ihwild »

A deal has been struck. So soon I can concentrate on other projects.

Thanks for everyone's advice.

Rich
User avatar
azdave
Corvair of the Year
Corvair of the Year
Posts: 2127
Joined: Fri Dec 11, 2009 1:27 pm
Location: Phoenix, AZ

Re: selling corvair question

Post by azdave »

ihwild wrote:A deal has been struck. So soon I can concentrate on other projects.

Thanks for everyone's advice.

Rich
So after everyone's pricing help what did it sell for?
Dave W. from Gilbert, AZ

66 Corsa 140/4 Yenko Stinger Tribute
66 Corsa 140 Coupe w/factory A/C
65 Monza 4DR 140/PG w/factory A/C
65 Monza 4DR EJ20T/5
64 Greenbrier 110/PG, Standard 6-Door
ihwild
Posts: 26
Joined: Sat May 18, 2013 3:40 pm

Re: selling corvair question

Post by ihwild »

I ended up letting it go for $750. That is after someone else decided to relocate a telephone pole into my yard and lay it across the rear fender of the corvair. It put a decent dent into the fender after traveling about 50-75 feet from the poles original location.

Rich
ihwild
Posts: 26
Joined: Sat May 18, 2013 3:40 pm

Re: selling corvair question

Post by ihwild »

Evidently the guy who bought it is trying to flip it. Has it in Craig list for $2000 (originally $2500) right now in Westbrook, Maine. Did a bit of basic repair (new muffler, and ebrake fix) along with an oil change. But the dent is still there and don't know what else he did to it. It did run fine when I had it and shifted fine. Not sure if he fixed any of the body work though.

Rich
Post Reply

Return to “Ask your Mechanical Questions here”