New toy
New toy
I got this today.
Sent from my iPhone using Corvair Forum mobile app
Sent from my iPhone using Corvair Forum mobile app
Scott
1960 Monza Coupe
1965 Evening Orchid Corsa Turbo (project)
1961 Rampside (project)
1964 Spyder coupe (patina car, running)
1964 faux Spyder (project/parts car)
1964 Monza (parts car)
1963 Monza (parts car)
1960 Monza Coupe
1965 Evening Orchid Corsa Turbo (project)
1961 Rampside (project)
1964 Spyder coupe (patina car, running)
1964 faux Spyder (project/parts car)
1964 Monza (parts car)
1963 Monza (parts car)
Re: New toy
Nice! If I had not found a used portable lift a few years back I was ready to buy one of those. I don't want a lift that is locked in one location.
Dave W. from Gilbert, AZ
66 Corsa 140/4 Yenko Stinger Tribute
66 Corsa 140 Coupe w/factory A/C
65 Monza 4DR 140/PG w/factory A/C
65 Monza 4DR EJ20T/5
64 Greenbrier 110/PG, Standard 6-Door
66 Corsa 140/4 Yenko Stinger Tribute
66 Corsa 140 Coupe w/factory A/C
65 Monza 4DR 140/PG w/factory A/C
65 Monza 4DR EJ20T/5
64 Greenbrier 110/PG, Standard 6-Door
- JackBurton
- Posts: 62
- Joined: Mon May 04, 2020 9:34 pm
Re: New toy
I’m looking at getting one as well. What model did you get
Sent from my iPhone using Corvair Forum mobile app
Sent from my iPhone using Corvair Forum mobile app
- Bruins_Fan
- Corvair of the Month
- Posts: 374
- Joined: Wed Aug 08, 2012 9:45 am
- Location: North Shore, MA
- bbodie52
- Corvair of the Month
- Posts: 11897
- Joined: Mon Aug 06, 2012 12:33 pm
- Location: Lake Chatuge Hayesville, NC
- Contact:
Re: New toy
This YouTube video might shed some light on the "new toy"...
Derek Spratt wrote:I love my new lift system - gives me very flexible side, front or rear access, minimal interference, light weight, safe, solid, with rollers to move the vehicle around (an option), and another 'low profile' option to allow for less ground clearance requirements and/or the ability to drive over it when you don't have enough room beside the vehicle to position it prior to lifting ...
Brad Bodie
Lake Chatuge, North Carolina
1966 Corvair Corsa Convertible
Lake Chatuge, North Carolina
1966 Corvair Corsa Convertible
Re: New toy
Neat product and I love that several Corvair images are FEATURED on the website! https://ezcarlift.com/
The top image is a slide show of many cars, including this LM convertible, an EM and a Corvair van!
The top image is a slide show of many cars, including this LM convertible, an EM and a Corvair van!
Re: New toy
It’s on my list to get this year. Tired of jacks and jack stands. Trying to use two jacks to jack up the rear.
Sent from my iPhone using Corvair Forum mobile app
Sent from my iPhone using Corvair Forum mobile app
65 Monza
Cincinnati, OH
Cincinnati, OH
Re: New toy
Wow, you guys are richer than I am!
While you guys have your checkbooks open, pony up for Leno's lift at https://youtu.be/OY6X_603MMc?t=1069
While you guys have your checkbooks open, pony up for Leno's lift at https://youtu.be/OY6X_603MMc?t=1069
-
- Posts: 2009
- Joined: Wed Oct 13, 2010 12:51 pm
- Location: Northlake, TX
Re: New toy
I've got six of those. They are cool for lifting big trucks but I can't really imagine using them instead of a small lift on cars.
157 Corvairs, 5 Ultravans and counting
Northlake, TX
Northlake, TX
Re: New toy
My lift was purchased used for $1500 and I'm sure could sell it for more than that today. Best tool money I ever spent but I'm not rich. I saved up my tool funds (mad money) while buying and reselling (or parting out) 17 Eclipses, Talons and Lasers some years back.
Scott,
Have you had a chance to try it out yet?
Dave W. from Gilbert, AZ
66 Corsa 140/4 Yenko Stinger Tribute
66 Corsa 140 Coupe w/factory A/C
65 Monza 4DR 140/PG w/factory A/C
65 Monza 4DR EJ20T/5
64 Greenbrier 110/PG, Standard 6-Door
66 Corsa 140/4 Yenko Stinger Tribute
66 Corsa 140 Coupe w/factory A/C
65 Monza 4DR 140/PG w/factory A/C
65 Monza 4DR EJ20T/5
64 Greenbrier 110/PG, Standard 6-Door
- Bruins_Fan
- Corvair of the Month
- Posts: 374
- Joined: Wed Aug 08, 2012 9:45 am
- Location: North Shore, MA
Re: New toy
Ordered my EZ Lift today. Finally got the $ for a long overdue unclaimed property claim!!
Sent from my SM-G975U1 using Corvair Forum mobile app
Sent from my SM-G975U1 using Corvair Forum mobile app
'66 Monza Convertible 110hp Powerglide
Re: New toy
Awesome!!!Bruins_Fan wrote:Ordered my EZ Lift today. Finally got the $ for a long overdue unclaimed property claim!!
Sent from my SM-G975U1 using Corvair Forum mobile app
Sent from my iPhone using Corvair Forum mobile app
Scott
1960 Monza Coupe
1965 Evening Orchid Corsa Turbo (project)
1961 Rampside (project)
1964 Spyder coupe (patina car, running)
1964 faux Spyder (project/parts car)
1964 Monza (parts car)
1963 Monza (parts car)
1960 Monza Coupe
1965 Evening Orchid Corsa Turbo (project)
1961 Rampside (project)
1964 Spyder coupe (patina car, running)
1964 faux Spyder (project/parts car)
1964 Monza (parts car)
1963 Monza (parts car)
Re: New toy
I finally put it together last night. Also made a drive over kit out of wood for it.
Sent from my iPhone using Corvair Forum mobile app
Sent from my iPhone using Corvair Forum mobile app
Scott
1960 Monza Coupe
1965 Evening Orchid Corsa Turbo (project)
1961 Rampside (project)
1964 Spyder coupe (patina car, running)
1964 faux Spyder (project/parts car)
1964 Monza (parts car)
1963 Monza (parts car)
1960 Monza Coupe
1965 Evening Orchid Corsa Turbo (project)
1961 Rampside (project)
1964 Spyder coupe (patina car, running)
1964 faux Spyder (project/parts car)
1964 Monza (parts car)
1963 Monza (parts car)
- Bruins_Fan
- Corvair of the Month
- Posts: 374
- Joined: Wed Aug 08, 2012 9:45 am
- Location: North Shore, MA
Re: New toy
Sent from my SM-G975U1 using'66 Monza Convertible 110hp Powerglide
Re: New toy
Nice. Makes my two-trolley-jack setup look positively ghetto!
- Bruins_Fan
- Corvair of the Month
- Posts: 374
- Joined: Wed Aug 08, 2012 9:45 am
- Location: North Shore, MA
Re: New toy
I just posted in another thread, that my EZ Lift is a little short to simultaneously hit 4 exact lift points. I've actually only had reason to lift the car twice since I bought the lift last fall. I did see some photos on the EZ lift website, but anyone have better/close-up pics and/or thoughts on the best positioning for this lift with a late model? I think the pinch weld bent a bit last time I lifted it.
If not, I can call Boytcho.
If not, I can call Boytcho.
'66 Monza Convertible 110hp Powerglide