CORSA Convention - Rules for Autocross & Tech Inspection

Corvair Society of America discussion, questions, feedback, ideas
Post Reply
User avatar
Allan Lacki
Posts: 434
Joined: Sat Mar 13, 2010 3:06 pm

CORSA Convention - Rules for Autocross & Tech Inspection

Unread post by Allan Lacki » Mon Jul 16, 2012 5:33 am

If you have signed up to participate in the convention autocross at the Stafford Motor Speedway on July 25, are you aware that under CORSA rules you are expected to classify your own car in advance?

It’s easy to do, and even fun if you have never taken a look at your car with autocross classification in mind.

Just go to the following page on the CORSA web site, download the Autocross Rules, and take a look at the section covering classification: ... ross-rules

Also, shown below is a preliminary copy of the tech inspection form mentioned in the rules:

Technical Inspection and Classification Form

Driver's Name_____________________________
Vehicle____________________ Assigned Autocross #_________
Classification_______ (Self-classified, see CORSA Autocross Rules)
Car must be presented for inspection with all items checked by driver. Inspectors will check for compliance before vehicle can be driven on track.

Number visible on left side.

Hub caps/trim rings off; Lug nuts tight.
Tires: No visible damage; 1/16" minimum tread on D.O.T. tires

No loose items in trunk or interior of car.

Sufficient shock damping.
Check bearings, ball joints, clearances.

Hoses, master cylinder full.
Hard-Harder test.

Metal to metal connections. Belts installed securely.
Comp. class cars require min. 4 point harness with 3" webbing.

Engine compartment:
No fluid leaks.
Throttle-action & return.
Battery: Secure

Snell 2000 or newer.

Driver Signature _______________

Inspector Initials _______________

We’ll see you at the track! Al Lacki for NECC and the Convention Committee

Post Reply

Return to “Corvair Society of America discussion”