OK, I am in the middle of putting in a Corsa dash in my 67 Monza and I am not sure as to where I can get the plastic hose and connectors. Plus, I was just going to tie it into the extra vacuum nipple on the left carb or should it be tied into the balance tube that runs between the carbs.
Thanks,
Scott
Scott Miller
67 Monza Coupe
Dayton,OH
Need some help with the Vacuum Guage & Hooking it up
-
- Posts: 5
- Joined: Tue Dec 15, 2009 3:46 pm
Re: Need some help with the Vacuum Guage & Hooking it up
You can get the plastic tubing and compression fittings at any auto parts store, and it should be in the balance tube so you're seeing vacuum from all cylinders not just one bank.
-
- Corvair of the Month
- Posts: 745
- Joined: Fri Dec 11, 2009 5:50 am
- Location: Maine
Re: Need some help with the Vacuum Guage & Hooking it up
What No Nall said.
1966 Corsa convertible, 140, 4sp.
1965 Monza Convertible, 110, PG.
Dirigo Corvair group.
http://www.dirigocorvairs.net/
1965 Monza Convertible, 110, PG.
Dirigo Corvair group.
http://www.dirigocorvairs.net/