removal of 1966 turn signal switch
removal of 1966 turn signal switch
how do you get the turn signal out of 1966 monza?
- terribleted
- Posts: 4584
- Joined: Sun Apr 18, 2010 2:36 pm
- Location: Atlanta, GA
- Contact:
Re: removal of 1966 turn signal switch
Front turn signal lamp unit? Rear turn signal/brake lamp unit? Turn signal switch? The rear is pretty obvious. The fronts are access from the rear. Remove the trunk corner cover plates to access the brackets and nuts. The switch is accessed by pulling the steering wheel, removing a few screws, and often removing a snap ring hold the bearing unit to the column.
Corvair guy since 1982. I have personally restored at least 20 Vairs, many of them restored ground up.
Currently working full time repairing Corvairs and restoring old cars.
https://www.facebook.com/tedsautorestoration/
Located in Snellville, Georgia
Currently working full time repairing Corvairs and restoring old cars.
https://www.facebook.com/tedsautorestoration/
Located in Snellville, Georgia
- bbodie52
- Corvair of the Month
- Posts: 11897
- Joined: Mon Aug 06, 2012 12:33 pm
- Location: Lake Chatuge Hayesville, NC
- Contact:
Re: removal of 1966 turn signal switch
Here are the instructions from the 1965 Corvair Chassis Shop Manual (these basic procedures are applicable to all Late Model (1965-1969) Corvairs)...how do you get the turn signal out of 1966 monza?
The procedures for removing and replacing the turn signal assembly are on pages 12-13 through 12-14. This section of the factory shop manual is downloadable and can be viewed using Adobe Reader. The procedure refers to Section 9 of the Chassis Shop Manual for instructions on how to remove and replace the steering wheel. The steering wheel removal procedure begins on page 9-3. Here is that section of the manual... The entire 1965 Corvair Chassis Shop Manual and other useful Corvair reference manuals can be downloaded for free at the following Web sites...
Downloadable Corvair Shop Manuals, Parts Manuals, Service Manuals, etc.
http://1969corvair.com/techpages/Corvai ... Index.html
Early Model Corvair Shop Manual & Other Useful Manuals
http://www.corvair.org/chapters/corvanatics/manuals.php
If you don't have Adobe Reader installed on your PC, the software is free and can be downloaded at the following Web location...
http://get.adobe.com/reader/
---------------------------------------------------------------------------------------------------
If you need turn signal switch assembly parts, they can be found on the Clark's Corvair Parts online catalog, pages 87-88.
http://www.corvair.com/user-cgi/catalog ... IN&page=87
---------------------------------------------------------------------------------------------------
You will need a steering wheel puller tool to remove the steering wheel without damage. These tools can usually be rented or purchased locally at an auto parts store. Clark's Corvair Parts also sells this tool (Part No: C1119) for $11.80. It can be found on page TOOLS-7 of the online catalog...
http://www.corvair.com/user-cgi/catalog ... ge=TOOLS-7
Similar tools can also be purchased online at Amazon.com or from other retailers...
http://www.amazon.com/s/ref=nb_sb_noss_ ... eel+puller
Hope this information is useful to you. Again, welcome to the Corvair Forum!
Brad Bodie
Lake Chatuge, North Carolina
1966 Corvair Corsa Convertible
Lake Chatuge, North Carolina
1966 Corvair Corsa Convertible
Re: removal of 1966 turn signal switch
thanks for the turn signal help.
Re: removal of 1966 turn signal switch
In case you haven't seen this article... it helped me immensely!
http://www.corvairkid.com/67-9signal.htm
http://www.corvairkid.com/67-9signal.htm
Lon Nestrud
Denver, CO
1967 Monza Convertible 3-speed MT
Denver, CO
1967 Monza Convertible 3-speed MT
Re: removal of 1965 turn signal switch I had wrong yrsr
Grandson broke off turn signal. Arm. From turn signal
Last edited by Eddddie on Tue Sep 03, 2019 10:18 am, edited 1 time in total.
Re: removal of 1966 turn signal switch
Same thing happened to me when I let a child sit in the car so his mom could take a picture. First thing he did was grab the turn signal lever and break it off. Had to replace the whole plastic assembly inside. Not a quick fix.
http://californiacorvairparts.com/index ... r=category
Dave W. from Gilbert, AZ
66 Corsa 140/4 Yenko Stinger Tribute
66 Corsa 140 Coupe w/factory A/C
65 Monza 4DR 140/PG w/factory A/C
65 Monza 4DR EJ20T/5
64 Greenbrier 110/PG, Standard 6-Door
66 Corsa 140/4 Yenko Stinger Tribute
66 Corsa 140 Coupe w/factory A/C
65 Monza 4DR 140/PG w/factory A/C
65 Monza 4DR EJ20T/5
64 Greenbrier 110/PG, Standard 6-Door
- bbodie52
- Corvair of the Month
- Posts: 11897
- Joined: Mon Aug 06, 2012 12:33 pm
- Location: Lake Chatuge Hayesville, NC
- Contact:
Re: removal of 1966 turn signal switch
http://californiacorvairparts.com/index ... er=product
NEW 1965-66 TURN SIGNAL SWITCH
Part No. CC06333R
$60.00
Directional Switches — '65-'69
Steering Wheel must be pulled to see or replace these switches.
Part number C862: 65-66 & 64-65 FC DIRECTIONAL SWITCH
Weight: 1 lbs 0 oz
Catalog Page(s): 87
Price: $ 60.50
NEW 1965-66 TURN SIGNAL SWITCH
Part No. CC06333R
$60.00
http://www.corvair.com/user-cgi/catalog ... ow_page=87New turn signal switch with bearing for 1965-66 Corvairs including Corsas and convertibles. Also correct for 1964-65 Corvair trucks and vans
including Greenbriers and Rampsides. Exact fit, mounts in steering column. No cutting or splicing necessary. Includes bearing assembly. Harness and cancelling cam included. Correct for models without tilt steering column Also fits: Belair, Biscayne, Caprice, Chevy II, Corvair, Corvette, Impala and Nova, 1964-66 Chevy Bel-Air, 1964-66 Chevy Biscayne, 1964-66 Chevy Caprice, 1964-66 Chevy, 1965-66 Chevy Corvair, 1964-66 Chevy Corvette, 1964-66 Chevy Impala, 1964-65 Chevy Nova, 1964-65 Chevy Truck
Directional Switches — '65-'69
Steering Wheel must be pulled to see or replace these switches.
Part number C862: 65-66 & 64-65 FC DIRECTIONAL SWITCH
Weight: 1 lbs 0 oz
Catalog Page(s): 87
Price: $ 60.50
- Attachments
-
- 1965 Corvair Assembly Manual - STEERING.pdf
- 1965 Corvair Assembly Manual - STEERING
- (1.92 MiB) Downloaded 55 times
-
- 1965 Corvair Chassis Shop Manual - SECTION 9 - STEERING.pdf
- 1965 Corvair Chassis Shop Manual - SECTION 9 - STEERING
- (4.31 MiB) Downloaded 48 times
-
- 1965 Corvair Chassis Shop Manual - SECTION 12 - BODY & CHASSIS ELECTRICAL.pdf
- 1965 Corvair Chassis Shop Manual - SECTION 12 - BODY & CHASSIS ELECTRICAL
- (6.99 MiB) Downloaded 50 times
Brad Bodie
Lake Chatuge, North Carolina
1966 Corvair Corsa Convertible
Lake Chatuge, North Carolina
1966 Corvair Corsa Convertible
Re: removal of 1966 turn signal switch
Removed steering wheel, etc. Cannot get the switch out. Have pryed, tried pliers, etc. Do not want to ruin the bearing. What's the trick?
Re: removal of 1966 turn signal switch
Look for a well hidden snap ring like in the photo. It is just above the bearing but not obvious. Sometimes you can push the steering wheel inward a fraction to get at it with an ice pick or tiny screwdriver.
Dave W. from Gilbert, AZ
66 Corsa 140/4 Yenko Stinger Tribute
66 Corsa 140 Coupe w/factory A/C
65 Monza 4DR 140/PG w/factory A/C
65 Monza 4DR EJ20T/5
64 Greenbrier 110/PG, Standard 6-Door
66 Corsa 140/4 Yenko Stinger Tribute
66 Corsa 140 Coupe w/factory A/C
65 Monza 4DR 140/PG w/factory A/C
65 Monza 4DR EJ20T/5
64 Greenbrier 110/PG, Standard 6-Door
- bbodie52
- Corvair of the Month
- Posts: 11897
- Joined: Mon Aug 06, 2012 12:33 pm
- Location: Lake Chatuge Hayesville, NC
- Contact:
Re: removal of 1966 turn signal switch
Removing turn signal switch and cancelling cam
http://corvaircenter.com/phorum/read.php?1,653125
Left-Click Images to Enlarge for Better Viewing. Click a second time for Maximum Enlargement...
- Attachments
-
- 1965 Corvair Assembly Manual - STEERING.pdf
- 1965 Corvair Assembly Manual - STEERING
- (1.92 MiB) Downloaded 31 times
-
- 1965 Corvair Chassis Shop Manual - SECTION 9 - STEERING.pdf
- 1965 Corvair Chassis Shop Manual - SECTION 9 - STEERING
- (4.31 MiB) Downloaded 39 times
-
- 1965 Corvair Chassis Shop Manual - SECTION 12 - BODY & CHASSIS ELECTRICAL.pdf
- 1965 Corvair Chassis Shop Manual - SECTION 12 - BODY & CHASSIS ELECTRICAL
- (6.99 MiB) Downloaded 41 times
Brad Bodie
Lake Chatuge, North Carolina
1966 Corvair Corsa Convertible
Lake Chatuge, North Carolina
1966 Corvair Corsa Convertible
Re: removal of 1966 turn signal switch
Thanks for the extra help Brad. Here is what I recall my 65 looked like inside when it was time to pull it apart. Pics borrowed from Google images. I've heard that this snap ring was not used until mid-65 model year production so keep it in mind that lots of little changes happen along the way.
Dave W. from Gilbert, AZ
66 Corsa 140/4 Yenko Stinger Tribute
66 Corsa 140 Coupe w/factory A/C
65 Monza 4DR 140/PG w/factory A/C
65 Monza 4DR EJ20T/5
64 Greenbrier 110/PG, Standard 6-Door
66 Corsa 140/4 Yenko Stinger Tribute
66 Corsa 140 Coupe w/factory A/C
65 Monza 4DR 140/PG w/factory A/C
65 Monza 4DR EJ20T/5
64 Greenbrier 110/PG, Standard 6-Door
Re: removal of 1966 turn signal switch
Thanks for the great info, Dave. Even the manual doesn't mention the snap ring. You da man!
Re: removal of 1966 turn signal switch
Just want to ask Dave from AZ when and how often does he drive his fleet of LM Corvairs. What's your favorite to drive?
Re: removal of 1966 turn signal switch
Not very often the last few months but 5 of them are licensed and insured which is actually pretty cheap using Hagerty and classic registration. I drive them more on weekends but I try to take one to work each Friday if I can. 3 of them are in various states of either being restored or parted out. The V8 is the most fun because people don't expect to see a big block in the rear.
Dave W. from Gilbert, AZ
66 Corsa 140/4 Yenko Stinger Tribute
66 Corsa 140 Coupe w/factory A/C
65 Monza 4DR 140/PG w/factory A/C
65 Monza 4DR EJ20T/5
64 Greenbrier 110/PG, Standard 6-Door
66 Corsa 140/4 Yenko Stinger Tribute
66 Corsa 140 Coupe w/factory A/C
65 Monza 4DR 140/PG w/factory A/C
65 Monza 4DR EJ20T/5
64 Greenbrier 110/PG, Standard 6-Door