All Models and Years
- Posts: 43
- Joined: Thu Sep 24, 2020 3:26 am
I got a ultimate bushing kit for my throttle linkage from clarks. Of course all the little clips, washers, and bushings come in one little baggy with nothing to tell me what is what. Now this would not be a problem if I took everything apart, but that is not the case. Items 16 is listed as a special washer and item 18 is listed as a special throttle washer and of course I need 2 of each. So in the attached picture does anyone know which is which?
- Washer picture
1963 Impala SS convertible project
1963 Monza Spyder project
1963 Impala coupe Pro Street Project
1964 Monza Parts car
1963 Impala hard top sedan parts car
- Posts: 69
- Joined: Sat Feb 29, 2020 9:54 pm
The bigger one is 18
The smaller one is 16
They go in place where the picture shows, you can see the slight difference in size in the picture too.
That is my two cents & how I would go about it if I ordered & wasn't sure. I'd go from those pictures at the top of that page & in the assembly manual too.
1964 Corvair Monza/110hp/4 Speed
1961 Corvair Lakewood/80hp/3 Speed