I purchased new tie rod end from Clarks and rebuilt my steering linkage last winter, before I finally install them is it possible to identify the inner from the outer. I think that the left hand thread was the inner but would like to know for sure prior to bolting it down.
Thanks
Tie rod ends
Re: Tie rod ends
On an EM, they’re quite a bit different, inner tie rods have a longer shank before the threads than the outers. So easy to tell.
On the LM’s, the inners are left hand thread, outers are right.
On the LM’s, the inners are left hand thread, outers are right.
1963 Monza Spyder convertible
-
- Posts: 55
- Joined: Tue May 26, 2015 4:53 pm
- Location: Vernon, BC, Canada
Re: Tie rod ends
Thank you, I had it correct and will look for the shank length difference to confirm also. So happy to have everyone's help when I post questions.
Cheers. Robbie
Cheers. Robbie