Engine running on engine stand
-
- Posts: 11
- Joined: Sun Oct 27, 2019 5:10 pm
Engine running on engine stand
Has anyone run their corvair engine on a regular strand, or does everyone build a cradle?
-
- Posts: 887
- Joined: Thu Sep 26, 2013 2:42 pm
Re: Engine running on engine stand
I built one of misc. steel shelving stored in the back yard.
Used a front engine mount, then put a starter on the bellhousing, using some old wheel lugs as spacers.
Have used the stand many times and after an engine rebuild, start the engine and do all adjustments before installing the engine into the car.
Used a front engine mount, then put a starter on the bellhousing, using some old wheel lugs as spacers.
Have used the stand many times and after an engine rebuild, start the engine and do all adjustments before installing the engine into the car.
Jerry Whitt
ASE CERTIFIED MASTER TECHNICIAN
Retired
Hemet, Callifornia
65 Monza, purchased new
65 Corsa convertible
ASE CERTIFIED MASTER TECHNICIAN
Retired
Hemet, Callifornia
65 Monza, purchased new
65 Corsa convertible
Re: Engine running on engine stand
I've run them on a typical 4-caster stand but also just sitting on the garage floor. A few folks have built some really nice engine stands with gauge panels, fuel tanks, etc.
https://www.youtube.com/watch?v=_ahBvEIkPQg
https://www.youtube.com/watch?v=_ahBvEIkPQg
Dave W. from Gilbert, AZ
66 Corsa 140/4 Yenko Stinger Tribute
66 Corsa 140 Coupe w/factory A/C
65 Monza 4DR 140/PG w/factory A/C
65 Monza 4DR EJ20T/5
64 Greenbrier 110/PG, Standard 6-Door
66 Corsa 140/4 Yenko Stinger Tribute
66 Corsa 140 Coupe w/factory A/C
65 Monza 4DR 140/PG w/factory A/C
65 Monza 4DR EJ20T/5
64 Greenbrier 110/PG, Standard 6-Door
Re: Engine running on engine stand
I built one out of 2x6’s and put casters on it so I could roll it around. I recently updated my turbo ignition and did a video of my first start in my driveway. You can view it here: http://www.cincotek.com/Corvair/66Vair_EDIS6.mp4
Alec
Alec
Alec Carlson
Dahlonega, GA
1965 Regal Red Corsa 4 Speed Turbo Convertible
Restoration "In Progress"...
Dahlonega, GA
1965 Regal Red Corsa 4 Speed Turbo Convertible
Restoration "In Progress"...
-
- Posts: 11
- Joined: Sun Oct 27, 2019 5:10 pm
Re: Engine running on engine stand
Great, exactly what I was looking for.
Thanks
Thanks
Re: Engine running on engine stand
I bolted up an old diff housing to a regular engine stand. This provides the perfect mate for your built engine and bellhousing to bolt up to with starter. Place a battery on top of the diff case (perfect size to hold a battery :) and you’re off to the races!
Sent from my iPhone using Corvair Forum mobile app
Sent from my iPhone using Corvair Forum mobile app