Telescopic Steering Reassembly

All Models and Years
Post Reply
gregpenn
Posts: 43
Joined: Wed Jul 12, 2017 4:17 pm

Telescopic Steering Reassembly

Unread post by gregpenn » Fri Jan 19, 2018 7:51 am

Does anyone have a detailed diagram or instructions of how to assemble the telescopic steering components? I've got the exploded parts diagram, but I need details to put it back together. 65 Monza- I took the steering wheel off to repair turn signal switch, and I purchased a horn button assembly for a 65 Corvette thinking that will fit this column. From the turn signal switch, in what order/how does the spring, nut, horn and steering wheel go on? The threaded cog that is held by 2 machine screws has a red mark, the plate has a red mark, and the stop post is marked red, but trying to line these up doesn't work and the tightening ring is either too loose or too tight for adjustment. How is the horn button energized? I see no wires. If only I had taken photos as I disassembled the parts.Image

Sent from my [device_name] using Corvair Forum mobile app


rfw66
Posts: 194
Joined: Tue Feb 09, 2010 5:38 pm
Location: Oklahoma

Telescopic Steering Reassembly

Unread post by rfw66 » Mon Jan 22, 2018 7:51 am

This diagram shows every part in the telescopic column
Hope this helps

Sent from my iPhone using Corvair Forum mobile app
Bob W
65 Corsa convertible
68 Monza coupe

rfw66
Posts: 194
Joined: Tue Feb 09, 2010 5:38 pm
Location: Oklahoma

Re: Telescopic Steering Reassembly

Unread post by rfw66 » Mon Jan 22, 2018 7:58 am

Image


Sent from my iPhone using Corvair Forum mobile app
Bob W
65 Corsa convertible
68 Monza coupe

Post Reply

Return to “Ask your Mechanical Questions here”