Low Band Adjustment Access Panel

All Models and Years
KiltedPhoenix
Posts: 38
Joined: Sat Dec 31, 2016 12:49 pm

Low Band Adjustment Access Panel

Post by KiltedPhoenix »

Hey guys. I need some help from the 60/61 owners. I need to adjust my low band on my 63 PG, I was reading in the shop manual that there was an access panel to do this on 60 and 61 cars but was eliminated for 62. I really need a picture of exactly where this is. Dropping the trans is out of the question as I really dont have time for that. My car is my daily driver, my back up vehicle is dangerous in the snow (I'm in Maine) so i need this back on the road ASAP. If you have a picture of this handy or can easily get one that would be much appreciated. There is no picture of it in the shop manual and the assembly manual I have is for a 63 so it wouldnt be in there either. Also this is on a 4 door, I know the parcel shelf area on a 2 door is different, so 4 door pics only please.

Thanks.
joelsplace
Posts: 1950
Joined: Wed Oct 13, 2010 12:51 pm
Location: Northlake, TX

Re: Low Band Adjustment Access Panel

Post by joelsplace »

You can do it without cutting a hole or dropping the drivetrain. It's just a little tight.
157 Corvairs, 5 Ultravans and counting
Northlake, TX
Post Reply

Return to “Ask your Mechanical Questions here”