crack in fan housing cover
crack in fan housing cover
Is this serious? do I need to replace? any advice would be greatly appreciated!!
Jeff Cannon, Smithfield VA
1966 Corvair Monza Convertible
1966 Corvair Monza Convertible
Re: crack in fan housing cover
That might be a casting "wrinkle", not unusual. The only way to tell is to look at the other side to see if it is a fracture that goes through the material.
Just my 2 cents.
Just my 2 cents.
Re: crack in fan housing cover
I don't believe it is a crack either. If you aren't pulling the cover, don't do it just to check the backside. Take some sandpaper and smooth out the ridge and then see if you can still detect a crack or not. Bell housing often have those ridges like that too. They cause many false alarms.
Dave W. from Gilbert, AZ
66 Corsa 140/4 Yenko Stinger Tribute
66 Corsa 140 Coupe w/factory A/C
65 Monza 4DR 140/PG w/factory A/C
65 Monza 4DR EJ20T/5
64 Greenbrier 110/PG, Standard 6-Door
66 Corsa 140/4 Yenko Stinger Tribute
66 Corsa 140 Coupe w/factory A/C
65 Monza 4DR 140/PG w/factory A/C
65 Monza 4DR EJ20T/5
64 Greenbrier 110/PG, Standard 6-Door
Re: crack in fan housing cover
Great! Thank you!!
Jeff Cannon, Smithfield VA
1966 Corvair Monza Convertible
1966 Corvair Monza Convertible