Where does this bolt go?
Where does this bolt go?
I think it is from the transmission mount. It needs to be replaced, anyone know where I can get one?
64 Monza Convertible
Re: Where does this bolt go?
Everything corvair is standard, so probably homedepot. If not, fastenal or McMaster Carr.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-Steve
1961 Corvair 700 Sedan (80hp 3spd Gasoline Heat)
1961 Corvair 700 Sedan (80hp 3spd Gasoline Heat)
- bbodie52
- Corvair of the Month
- Posts: 11894
- Joined: Mon Aug 06, 2012 12:33 pm
- Location: Lake Chatuge Hayesville, NC
- Contact:
Re: Where does this bolt go?
GRADE 8 Bolts Recommended.
http://www.corvair.com/user-cgi/catalog ... _page=167A
http://www.corvair.com/user-cgi/catalog ... _page=179A
Part number C6891: BOLT SET-TRANS TO CROSS MEMB 60-65 STD
Weight: 0 lbs 4 oz
Catalog Pages(s): 167A,179A
Price: $ 4.30
http://www.corvair.com/user-cgi/catalog ... _page=167A
http://www.corvair.com/user-cgi/catalog ... _page=179A
Part number C6891: BOLT SET-TRANS TO CROSS MEMB 60-65 STD
Weight: 0 lbs 4 oz
Catalog Pages(s): 167A,179A
Price: $ 4.30
Brad Bodie
Lake Chatuge, North Carolina
1966 Corvair Corsa Convertible
Lake Chatuge, North Carolina
1966 Corvair Corsa Convertible
Re: Where does this bolt go?
If it is from the transmission mount, remove one of the other bolts and use it to check the threads in the hole, you may need to get a helicoil or drill and tap the hole for the next larger size.
'64 Spyder Convertible
'63 Rampside (to be Rotisseried)
Toney, Alabama (just outside Huntsville)
'63 Rampside (to be Rotisseried)
Toney, Alabama (just outside Huntsville)
Re: Where does this bolt go?
The smooth small diameter end is a self centering function.
If you look at the bolt cap you should see the "Grade" marks. I suspect the bolt will be grade 5 or grade 8 - DO NOT use a cheap hardware ungraded bolt.
Yes the bolt hole threads probably need to be cleaned up with a tap. If lucky that will work - if not the hole can be repaired.
If you look at the bolt cap you should see the "Grade" marks. I suspect the bolt will be grade 5 or grade 8 - DO NOT use a cheap hardware ungraded bolt.
Yes the bolt hole threads probably need to be cleaned up with a tap. If lucky that will work - if not the hole can be repaired.
Re: Where does this bolt go?
I should have provided more details. I removed the drive train in my 64 Monza to get my differential and transmission rebuilt and I noticed this when I was cleaning all the hardware. It is a grade 8 bolt, and the smooth tip makes me wonder.
64 Monza Convertible