trunk lock not operating very well

All Models and Years
Canavair
Posts: 24
Joined: Mon Apr 11, 2016 3:41 pm
Location: Caledonia Ontario

trunk lock not operating very well

Post by Canavair »

LM 65 Monza sedan
The trunk lock has never worked great but I always was able to get it unlocked usually first try _ gentle push down on trunk lid and turning all the way to right usually did the trick. Now it is difficult to get key to get all the way to right and even if I can get it that far it often will still not open. When I do manage to get it open I test the lock and note that the lock part inside the trunk is sticking but it does move. It also has a bit of front to back movement (loose). Any suggestions.
User avatar
terribleted
Posts: 4588
Joined: Sun Apr 18, 2010 2:36 pm
Location: Atlanta, GA
Contact:

Re: trunk lock not operating very well

Post by terribleted »

Lubrication?? Spray liberally with some WD 40 or similar and then lubricate with spray white lithium grease. If you need to push down on the lid to get it to unlatch the adjustment might be too tight. Try slightly lowering the striker on the lid as well.
Corvair guy since 1982. I have personally restored at least 20 Vairs, many of them restored ground up.
Currently working full time repairing Corvairs and restoring old cars.
https://www.facebook.com/tedsautorestoration/

Located in Snellville, Georgia
skipvair
Posts: 248
Joined: Sun Apr 30, 2017 8:17 pm

Re: trunk lock not operating very well

Post by skipvair »

Try adjusting the locking mechanism a little looser.
Frank Metasavage

65 Corsa 140 4 speed with Weber IDAs
66 Corsa 140 4 speed Stock
Post Reply

Return to “Ask your Mechanical Questions here”