forced air heater install on EM

All Models and Years
jdflight
Posts: 110
Joined: Sat Aug 22, 2015 12:37 pm

forced air heater install on EM

Post by jdflight »

Good afternoon everyone

I am in the process of rebuilding my rear suspension, so I thought now would be a good time to install the heater that I bought. Before you ask no the engine is not pulled trying to do it without removing engine and transmission. So got half of the heater box in without the cross member flow portion attached, trying to mock up the installation and notice that there is a significant off set between the fresh air inlet and mouth of the heater. So I am wonder if I have the right heater, the one I have is from a 63 or 64. Oops mine is a 61 monza.

I could not tell the difference in pictures, my car did not have one installed. I do have the clarks sewn boot but it just does not seem to be right. Any suggestions or help would be appreciated. Stopped for the day it has the best of me. Sorry i did not take pictures.


Thanks for any help in advance.
jdflight
61Monza aka Wilma
:assault:

Return to “Ask your Mechanical Questions here”