my engine compartment project
- 66corsa57isetta
- Corvair of the Month
- Posts: 124
- Joined: Tue Feb 09, 2010 9:59 am
my engine compartment project
this winter ive been tackling redoing my engine compartment on my 66 Corsa. the outside of the car was in pretty nice condition when i bought it last may but the engine copartment need a little attention to be "show worthy". i started by taking it all apart and sending all the engine sheetmetal peices out to powdercoat along with the wheels i recently purchased. then i got on Clarks website and ordered a whole bunch of parts. i got a new engine wiring harness, gas lines, rubber grommets, air cleaners, engine compartment stickers, copper ground straps, fuel pump and all the brass connectors, plug wires, tune up kit with points, rotor, point lead wire, and distrubuter cap, fanbelt, top cover gaskets, hood bumpers, and probably a few other things im forgeting. i also got a coil and spark plugs from napa to finish the tuneup. then i masked everything off and painted the engine compartment. just got the powdercoated parts back today so ill post up some pics of what ive done so far and ill try to keep updates going. im thinking its gonna look pretty cool when its all put back together , heres a few of the pics ive taken so far...
-Michael Barney
Ft. Wayne, Indiana
-1966 Corsa Coupe, 140, 4 speed (sold but still in good hands!!)
-1957 BMW isetta 300 bubble window, 13 HP, 4 speed BEAST!!
Ft. Wayne, Indiana
-1966 Corsa Coupe, 140, 4 speed (sold but still in good hands!!)
-1957 BMW isetta 300 bubble window, 13 HP, 4 speed BEAST!!
Re: my engine compartment project
Whoa Michael ... that all came out pretty nice. Looks like a lot of work, but well worth it. Good job.
I LOVE the air cleaner treatments. Nice work.
I LOVE the air cleaner treatments. Nice work.
- TonyL
- Corvair of the Month
- Posts: 153
- Joined: Sat Dec 12, 2009 5:00 pm
- Location: Yuba City California
Re: my engine compartment project
Dude. Nice work on those air cleaners!
Re: my engine compartment project
I need to do that to my Stinger the engine bay is looking very ratting anymore.
- Gregory_Miller
- Corvair of the Month
- Posts: 919
- Joined: Tue Feb 23, 2010 1:54 pm
Re: my engine compartment project
Where did you get the Corsa emblems for the air cleaners? I need to do that too!!
- 66corsa57isetta
- Corvair of the Month
- Posts: 124
- Joined: Tue Feb 09, 2010 9:59 am
Re: my engine compartment project
i had them made by a local automotive graphics shop. i just took them one of my spare emblems and they duplicated it in vinyl. cost me a whole 20 bucks. well worth it in my opinion
-Michael Barney
Ft. Wayne, Indiana
-1966 Corsa Coupe, 140, 4 speed (sold but still in good hands!!)
-1957 BMW isetta 300 bubble window, 13 HP, 4 speed BEAST!!
Ft. Wayne, Indiana
-1966 Corsa Coupe, 140, 4 speed (sold but still in good hands!!)
-1957 BMW isetta 300 bubble window, 13 HP, 4 speed BEAST!!
Re: my engine compartment project
Could you repro a few more, and sell them here? I'd be interested in a few for my LM.
- 66corsa57isetta
- Corvair of the Month
- Posts: 124
- Joined: Tue Feb 09, 2010 9:59 am
Re: my engine compartment project
im considering doing that. seems to be a pretty good interest in them. ill have to go talk to the guy that made them for me and see if he will print me off a few sets. anyone else who might be interested let me know so i can get an idea of how many to get.
-Michael Barney
Ft. Wayne, Indiana
-1966 Corsa Coupe, 140, 4 speed (sold but still in good hands!!)
-1957 BMW isetta 300 bubble window, 13 HP, 4 speed BEAST!!
Ft. Wayne, Indiana
-1966 Corsa Coupe, 140, 4 speed (sold but still in good hands!!)
-1957 BMW isetta 300 bubble window, 13 HP, 4 speed BEAST!!
- Gregory_Miller
- Corvair of the Month
- Posts: 919
- Joined: Tue Feb 23, 2010 1:54 pm
Re: my engine compartment project
ME ME ME!!
Re: my engine compartment project
Michael, nice treatments and I'd like them too, but then I'd have to go to the 4 - 1 bbl carbs again .... so maybe I'll think about it. gggg
Re: my engine compartment project
Hey Michael who was your source for the air cleaners?
That is exactly what I'm after.
IRa
That is exactly what I'm after.
IRa
- 66corsa57isetta
- Corvair of the Month
- Posts: 124
- Joined: Tue Feb 09, 2010 9:59 am
Re: my engine compartment project
i got them from clarks corvair parts. theyre kind of on the expensive side but i didnt want to mess with trying to find used ones.
-Michael Barney
Ft. Wayne, Indiana
-1966 Corsa Coupe, 140, 4 speed (sold but still in good hands!!)
-1957 BMW isetta 300 bubble window, 13 HP, 4 speed BEAST!!
Ft. Wayne, Indiana
-1966 Corsa Coupe, 140, 4 speed (sold but still in good hands!!)
-1957 BMW isetta 300 bubble window, 13 HP, 4 speed BEAST!!
- 66corsa57isetta
- Corvair of the Month
- Posts: 124
- Joined: Tue Feb 09, 2010 9:59 am
Re: my engine compartment project
Mike J, what setup do you have on your car?
-Michael Barney
Ft. Wayne, Indiana
-1966 Corsa Coupe, 140, 4 speed (sold but still in good hands!!)
-1957 BMW isetta 300 bubble window, 13 HP, 4 speed BEAST!!
Ft. Wayne, Indiana
-1966 Corsa Coupe, 140, 4 speed (sold but still in good hands!!)
-1957 BMW isetta 300 bubble window, 13 HP, 4 speed BEAST!!
- Gregory_Miller
- Corvair of the Month
- Posts: 919
- Joined: Tue Feb 23, 2010 1:54 pm
Re: my engine compartment project
Just PM me with an address to send money to once you find out if they will make more, might be a little cheaper now that the preliminary work is done.
- 66corsa57isetta
- Corvair of the Month
- Posts: 124
- Joined: Tue Feb 09, 2010 9:59 am
Re: my engine compartment project
thats what im thinking too. i might possibly be working at the shop that made them part time this summer to learn how to do pinstripping and airbrushing. the owner of the shop is good friends with my dad and has offered to teach me so i think im going to take him up on it. so i might be able to learn how to make these stickers too and maybe do some for the monza guys as well. well see where it goes. cant make any promises yet though. but im sure ill be able to at least get more corsa stickers made. ill be finding out tomorrow.
-Michael Barney
Ft. Wayne, Indiana
-1966 Corsa Coupe, 140, 4 speed (sold but still in good hands!!)
-1957 BMW isetta 300 bubble window, 13 HP, 4 speed BEAST!!
Ft. Wayne, Indiana
-1966 Corsa Coupe, 140, 4 speed (sold but still in good hands!!)
-1957 BMW isetta 300 bubble window, 13 HP, 4 speed BEAST!!
- 66corsa57isetta
- Corvair of the Month
- Posts: 124
- Joined: Tue Feb 09, 2010 9:59 am
Re: my engine compartment project
picture of the latest progress. planning on buttoning it up tomorrow and hopefully getting it fired up and driven!
-Michael Barney
Ft. Wayne, Indiana
-1966 Corsa Coupe, 140, 4 speed (sold but still in good hands!!)
-1957 BMW isetta 300 bubble window, 13 HP, 4 speed BEAST!!
Ft. Wayne, Indiana
-1966 Corsa Coupe, 140, 4 speed (sold but still in good hands!!)
-1957 BMW isetta 300 bubble window, 13 HP, 4 speed BEAST!!