pensylvania bondo bucket
Re: pensylvania bondo bucket
We're touching around 3 degrees c around hear at the moment, that short walk to the garage is getting longer, got to do more guitar practice to keep the fingers moving before they seize up altogether. is now a physical impossibility........
Re: pensylvania bondo bucket
Let battle commence. I bought a pair of wheel arch repair pannels for a 1996-2003 Mercedes Sprinter van, and with a bit of tweaking they should fit ok
- TikiRalf
- Corvair of the Month
- Posts: 621
- Joined: Tue May 24, 2011 1:07 am
- Location: Valkenswaard - Netherlands - Europe
- Contact:
Re: pensylvania bondo bucket
damm mart that is a crusty bondo rust bucket (with speedholes)
A lot of respect that you can fix that and will fix that. KEEP ON GOING !!!
Greetings Ralf
A lot of respect that you can fix that and will fix that. KEEP ON GOING !!!
Greetings Ralf
-
- Posts: 31
- Joined: Mon Oct 17, 2011 4:34 pm
Re: pensylvania bondo bucket
I am just blown away that anyone could sell a car like that and not feel guilty. I think I would be in jail about now if someone did that to me.
I also have to say that you are something else to take it all in stride and go forth and do a super job on fixing it up. You should be proud of your work.
Peace
I also have to say that you are something else to take it all in stride and go forth and do a super job on fixing it up. You should be proud of your work.
Peace
Re: pensylvania bondo bucket
If in doubt...CHOP IT OUT
- flat6_musik
- Posts: 2659
- Joined: Sun Apr 04, 2010 10:03 am
- Location: Hesperia, CA
Re: pensylvania bondo bucket
I don't think anyone could ever accuse you of not jumping in "whole hog", Mart! Whew!mart wrote:If in doubt...CHOP IT OUT
Re: pensylvania bondo bucket
theres a bit more to cut out but I dont want the back end to fall on the floor
Re: pensylvania bondo bucket
and I though the 67 winter ride I am working on was bad,nothing compared to what you are going thru. I am down to needing tires.
Re: pensylvania bondo bucket
still at it....drivers side
- Gregory_Miller
- Corvair of the Month
- Posts: 919
- Joined: Tue Feb 23, 2010 1:54 pm
Re: pensylvania bondo bucket
*shudder*
Re: pensylvania bondo bucket
I have been told welding is fun, so I am pretty delirious right now
-
- Corvair of the Month
- Posts: 745
- Joined: Fri Dec 11, 2009 5:50 am
- Location: Maine
Re: pensylvania bondo bucket
Great to see someone else who isn't afraid of rust and willing to save a Corvair. :) west coasters are spoiled. ;)
1966 Corsa convertible, 140, 4sp.
1965 Monza Convertible, 110, PG.
Dirigo Corvair group.
http://www.dirigocorvairs.net/
1965 Monza Convertible, 110, PG.
Dirigo Corvair group.
http://www.dirigocorvairs.net/
Re: pensylvania bondo bucket
it would be easier if it was just rust......its the previous repairs that are causing the problems
Re: pensylvania bondo bucket
Drivers rear fender almost ready for filler, NACA duct in position ready for bonding onto inside of fender
- Gregory_Miller
- Corvair of the Month
- Posts: 919
- Joined: Tue Feb 23, 2010 1:54 pm
Re: pensylvania bondo bucket
Pardon my ignorance... NACA duct?