Thanks man! gotta give credit to master66corsa57isetta wrote:zach, your new signature is awesome lol
Corsa moving to South Texas 100+ Heat
- cvair4life
- Posts: 802
- Joined: Wed Jul 14, 2010 12:22 am
- Location: San Antonio, TX
Re: 66 Silver Corsa
1966 Corsa Coupe
- 66corsa57isetta
- Corvair of the Month
- Posts: 124
- Joined: Tue Feb 09, 2010 9:59 am
Re: 66 Silver Corsa
haha well i dont know about master, jack of all trades master of none!
-Michael Barney
Ft. Wayne, Indiana
-1966 Corsa Coupe, 140, 4 speed (sold but still in good hands!!)
-1957 BMW isetta 300 bubble window, 13 HP, 4 speed BEAST!!
Ft. Wayne, Indiana
-1966 Corsa Coupe, 140, 4 speed (sold but still in good hands!!)
-1957 BMW isetta 300 bubble window, 13 HP, 4 speed BEAST!!
- Goop Of Oil
- Corvair of the Month
- Posts: 152
- Joined: Tue Mar 23, 2010 7:43 pm
- Location: Westminster, MD
Re: 66 Silver Corsa
Hey Zach. Congrats on the new Corsa. Here is my favorite picture of my old Turbo 66 Corsa with factory Head-rests. Pic was taken in Annapolis Maryland.cvair4life wrote:.. I've never seen head rests in a stock Vair... anybody have a picture of what they look like?
-------- Mark Holmlund --------
- cvair4life
- Posts: 802
- Joined: Wed Jul 14, 2010 12:22 am
- Location: San Antonio, TX
Re: 66 Silver Corsa
Thanks Goop for the pic. Mine does not have headrests... curious if that code is correct or not.
As a new question.
The Tach is stuck up at 5500 rpm... with the engine off. How do I diagnose and fix that?
As a new question.
The Tach is stuck up at 5500 rpm... with the engine off. How do I diagnose and fix that?
1966 Corsa Coupe
- 66corsa57isetta
- Corvair of the Month
- Posts: 124
- Joined: Tue Feb 09, 2010 9:59 am
Re: 66 Silver Corsa
it stuck at about 3500 few times for me. it came loose after i tapped on the guage a few times with a tad bit of force. never had it stick at 5500 but then again i dont think i ever hit 5500 with it
-Michael Barney
Ft. Wayne, Indiana
-1966 Corsa Coupe, 140, 4 speed (sold but still in good hands!!)
-1957 BMW isetta 300 bubble window, 13 HP, 4 speed BEAST!!
Ft. Wayne, Indiana
-1966 Corsa Coupe, 140, 4 speed (sold but still in good hands!!)
-1957 BMW isetta 300 bubble window, 13 HP, 4 speed BEAST!!
- cvair4life
- Posts: 802
- Joined: Wed Jul 14, 2010 12:22 am
- Location: San Antonio, TX
Re: 66 Silver Corsa
ummm... I'm pretty sure I made it to 5500 on a couple of my shifts... Fairly positive I was ripping down the the freeway at 95 to 100 mph neighborhoood66corsa57isetta wrote:it stuck at about 3500 few times for me. it came loose after i tapped on the guage a few times with a tad bit of force. never had it stick at 5500 but then again i dont think i ever hit 5500 with it
WHAT!! IT AIN'T SPEEDUN IF YA DON'T GIT KAWT
1966 Corsa Coupe
- cvair4life
- Posts: 802
- Joined: Wed Jul 14, 2010 12:22 am
- Location: San Antonio, TX
Re: 66 Silver Corsa
Finally got her up on a lift today.
It has nylon bushings in the rear struts on the engine mount side ... couldn't be sure if they were nylon on the wheel side..
very clean underneath and almost zero jack marks in the body weld line
Looks like a new or very clean gas tank
Lots of new bolts and other likewise hardware
Lots of new and newer looking rubber gromets, bushings, etc.
Brake shoes look brand new
List of pronto to-do:
1. New Brake cylinders all around... backs are showing signs they might be leaking
2. New everything from pitman arm out to wheels.
3. Put new deep oil pan on w/deep oil pick-up
4. Transfer Extractors from 68 to 66 to see how it sounds... although I kind like these mufflers
5. Investigate changing to a dual chamber master cylinder (Has anyone does this already and have a thread in here?)
6. New speedo cable... cuz I know that the car goes faster than 35
7. Tach issue.... (sticks around 3500 and 5500)
8. Right Rear Brake Light Bulb... think it just simply burned out
9. Change to all 4 brake-light/running light/turn signal mode.
10. Fix floppy driver's side mirror... any ideas on this?
11. Begin recording detailed history of oil coming out on engine shrouding near dipstick tube and from crank case vent
12. Rebuild shift tube or transfer shift tube from '68
13. Add quick-shifter (from '68)
14. Perform compression and leak-down tests to see if any particular cylinder is contributing to oil
15. TAKE SOME PICTURES AND VIDS during the freaking day time!
It has nylon bushings in the rear struts on the engine mount side ... couldn't be sure if they were nylon on the wheel side..
very clean underneath and almost zero jack marks in the body weld line
Looks like a new or very clean gas tank
Lots of new bolts and other likewise hardware
Lots of new and newer looking rubber gromets, bushings, etc.
Brake shoes look brand new
List of pronto to-do:
1. New Brake cylinders all around... backs are showing signs they might be leaking
2. New everything from pitman arm out to wheels.
3. Put new deep oil pan on w/deep oil pick-up
4. Transfer Extractors from 68 to 66 to see how it sounds... although I kind like these mufflers
5. Investigate changing to a dual chamber master cylinder (Has anyone does this already and have a thread in here?)
6. New speedo cable... cuz I know that the car goes faster than 35
7. Tach issue.... (sticks around 3500 and 5500)
8. Right Rear Brake Light Bulb... think it just simply burned out
9. Change to all 4 brake-light/running light/turn signal mode.
10. Fix floppy driver's side mirror... any ideas on this?
11. Begin recording detailed history of oil coming out on engine shrouding near dipstick tube and from crank case vent
12. Rebuild shift tube or transfer shift tube from '68
13. Add quick-shifter (from '68)
14. Perform compression and leak-down tests to see if any particular cylinder is contributing to oil
15. TAKE SOME PICTURES AND VIDS during the freaking day time!
1966 Corsa Coupe
- 66corsa57isetta
- Corvair of the Month
- Posts: 124
- Joined: Tue Feb 09, 2010 9:59 am
Re: 66 Silver Corsa
couple things:cvair4life wrote:Finally got her up on a lift today.
It has nylon bushings in the rear struts on the engine mount side ... couldn't be sure if they were nylon on the wheel side..
very clean underneath and almost zero jack marks in the body weld line
Looks like a new or very clean gas tank
Lots of new bolts and other likewise hardware
Lots of new and newer looking rubber gromets, bushings, etc.
Brake shoes look brand new
List of pronto to-do:
1. New Brake cylinders all around... backs are showing signs they might be leaking
2. New everything from pitman arm out to wheels.
3. Put new deep oil pan on w/deep oil pick-up
4. Transfer Extractors from 68 to 66 to see how it sounds... although I kind like these mufflers
5. Investigate changing to a dual chamber master cylinder (Has anyone does this already and have a thread in here?)
6. New speedo cable... cuz I know that the car goes faster than 35
7. Tach issue.... (sticks around 3500 and 5500)
8. Right Rear Brake Light Bulb... think it just simply burned out
9. Change to all 4 brake-light/running light/turn signal mode.
10. Fix floppy driver's side mirror... any ideas on this?
11. Begin recording detailed history of oil coming out on engine shrouding near dipstick tube and from crank case vent
12. Rebuild shift tube or transfer shift tube from '68
13. Add quick-shifter (from '68)
14. Perform compression and leak-down tests to see if any particular cylinder is contributing to oil
15. TAKE SOME PICTURES AND VIDS during the freaking day time!
the rear has brand new nylon bushings only on the engine side. the wheels side has brand new RUBBER bushings. i did this because ive driven a corvair with all nylon bushings and i thought it made it ride rougher. i put nylon bushings on the engine side because those bushings are exposed to alot more heat and possible oil leaks. the nylon will hold up to the heat and wear coming from the engine better than the rubber, or at least thats what ive been told.
i had an issue with the tail lights a few times too, try messing with the ground straps around the light housing first. thats what the issue was for me, it has a new harness in the engine compartment so it shouldnt be a wiring issue
i rebuilt the shift tube when i bought the car. it has a new coupler and pin, new bushings, new shift stabilizer rod w/ all new bushings and hardware, and new gaskets where the tube bolts to the floor. so you may probably dont need to rebuild it unless you want to.
-Michael Barney
Ft. Wayne, Indiana
-1966 Corsa Coupe, 140, 4 speed (sold but still in good hands!!)
-1957 BMW isetta 300 bubble window, 13 HP, 4 speed BEAST!!
Ft. Wayne, Indiana
-1966 Corsa Coupe, 140, 4 speed (sold but still in good hands!!)
-1957 BMW isetta 300 bubble window, 13 HP, 4 speed BEAST!!
- cvair4life
- Posts: 802
- Joined: Wed Jul 14, 2010 12:22 am
- Location: San Antonio, TX
Re: 66 Silver Corsa
Hey Mike.
thanks for the additional history. I saw the new hardware on the shift tube after I posted.. doh! I still want to put the quick shifter in :) Makes my '68 shift nice and tight!
The light was working fine but I think a bulb burned out cuz the left bank is all lit up and right just kind of faded and died. I do want to change it to the 4 brake light setup though :) Did you ever have reverse lights?
Sweet they are rubber huh.. I've been told the same thing on putting nylon on the engine side and rubber on the wheel side as being the best of both worlds.
thanks for the additional history. I saw the new hardware on the shift tube after I posted.. doh! I still want to put the quick shifter in :) Makes my '68 shift nice and tight!
The light was working fine but I think a bulb burned out cuz the left bank is all lit up and right just kind of faded and died. I do want to change it to the 4 brake light setup though :) Did you ever have reverse lights?
Sweet they are rubber huh.. I've been told the same thing on putting nylon on the engine side and rubber on the wheel side as being the best of both worlds.
1966 Corsa Coupe
- 66corsa57isetta
- Corvair of the Month
- Posts: 124
- Joined: Tue Feb 09, 2010 9:59 am
Re: 66 Silver Corsa
yeah i agree about the quick shift. that was something i always wanted to do to it too. i have to be honest i never really checked to see if the reverse lights worked lol. i would still check the grounds around the light that isnt working frst because i had similar issues with it. those bulbs arent that old but it could possiby just have burned out also
-Michael Barney
Ft. Wayne, Indiana
-1966 Corsa Coupe, 140, 4 speed (sold but still in good hands!!)
-1957 BMW isetta 300 bubble window, 13 HP, 4 speed BEAST!!
Ft. Wayne, Indiana
-1966 Corsa Coupe, 140, 4 speed (sold but still in good hands!!)
-1957 BMW isetta 300 bubble window, 13 HP, 4 speed BEAST!!
- cvair4life
- Posts: 802
- Joined: Wed Jul 14, 2010 12:22 am
- Location: San Antonio, TX
Re: 66 Silver Corsa
I'll let you know how it goes next week... I'm gonna check it out again Monday when I'm off work and then on Veteran's Day I'll have a mechanic fest and do the 66 and the 68 at the same time!!!! WOOT WOOT
1966 Corsa Coupe
- cvair4life
- Posts: 802
- Joined: Wed Jul 14, 2010 12:22 am
- Location: San Antonio, TX
Re: 66 Silver Corsa
Alright so I'm starting to plan my mechanic day...
Any hints on rebuilding and replacing everything but the drag link and the arm from the steering box.. between the front wheels.
Any hints on rebuilding and replacing everything but the drag link and the arm from the steering box.. between the front wheels.
1966 Corsa Coupe
- cvair4life
- Posts: 802
- Joined: Wed Jul 14, 2010 12:22 am
- Location: San Antonio, TX
Re: 66 Silver Corsa
Why do I always go to play with the car when it's overcast, dark, raining, stormy...cold.... hmmm
1966 Corsa Coupe
- cvair4life
- Posts: 802
- Joined: Wed Jul 14, 2010 12:22 am
- Location: San Antonio, TX
Re: 66 Silver Corsa
I just discovered Picnik.com
Makes my inability to use Photoshop fade away
Makes my inability to use Photoshop fade away
1966 Corsa Coupe
Re: 66 Silver Corsa
Scott
1960 Monza Coupe
1965 Evening Orchid Corsa Turbo (project)
1961 Rampside (project)
1964 Spyder coupe (patina car, running)
1964 faux Spyder (project/parts car)
1964 Monza (parts car)
1963 Monza (parts car)
1960 Monza Coupe
1965 Evening Orchid Corsa Turbo (project)
1961 Rampside (project)
1964 Spyder coupe (patina car, running)
1964 faux Spyder (project/parts car)
1964 Monza (parts car)
1963 Monza (parts car)
- cvair4life
- Posts: 802
- Joined: Wed Jul 14, 2010 12:22 am
- Location: San Antonio, TX
Re: 66 Silver Corsa
1966 Corsa Coupe