bobs1962 wrote:The tank wasn't bad, but the hoses were. The next guy will find this to his liking. Don't be too pissed at me for doing this.
Also, I did install a plug in the bottom of the tank.
Whats the resistance value of the pot on the sending unit. Mine seems erratic and I'd like to replace just the resistor. I don't need (or want) a 55 dollar unit replacement, do I?
dave t wrote:the sending unit is not available as a replalacable unit. try to clean it with brake cleaner. often that works. if you do re-use it. replace the filter sock. they are suposed to just press on but i have had them fall off. i use a small finger wipe of jb weld to secure them. jb weld does not get eaten by the fuel.bobs1962 wrote:The tank wasn't bad, but the hoses were. The next guy will find this to his liking. Don't be too pissed at me for doing this.
Also, I did install a plug in the bottom of the tank.
Whats the resistance value of the pot on the sending unit. Mine seems erratic and I'd like to replace just the resistor. I don't need (or want) a 55 dollar unit replacement, do I?
Sent from my SM-G930V using Corvair Forum mobile app
Sent from my SM-G930V using Corvair Forum mobile app