LM rear seat riser/firewall sheetmetal

Having trouble finding that special part you need? Post a wanted ad.
Forum rules
All Classified posts will be automatically deleted approximately 90 days after posting.
Post Reply
LilBlue66Corsa
Posts: 5
Joined: Wed Nov 15, 2017 5:41 am

LM rear seat riser/firewall sheetmetal

Unread post by LilBlue66Corsa » Fri Nov 17, 2017 8:57 am

Looking for rear seat riser and firewall sheetmetal sections for 65-69 Corsa Coupe. I'm located just NE of Montgomery AL. Any parts and/or information on securing parts is very much appreciated.

Ernie

User avatar
terribleted
Posts: 2094
Joined: Sun Apr 18, 2010 2:36 pm
Location: Atlanta, GA
Contact:

Re: LM rear seat riser/firewall sheetmetal

Unread post by terribleted » Fri Nov 17, 2017 10:35 am

You may want to post a photo of the area so someone with a car to cut up can see what you need.
Corvair guy since 1982. I have personally restored at least 20 Vairs, many of them restored ground up.
https://www.facebook.com/tedsautorestoration/

Located in Snellville, Georgia

User avatar
azdave
Corvair of the Year
Corvair of the Year
Posts: 1591
Joined: Fri Dec 11, 2009 1:27 pm
Location: Phoenix, AZ

Re: LM rear seat riser/firewall sheetmetal

Unread post by azdave » Fri Nov 17, 2017 10:52 am

Plugging a hole where a V8 used to be?
Dave W. located in Gilbert, AZ
66 Corsa 140 4-speed w/factory A/C
66 Corsa 140 4-speed w/factory A/C
66 Corsa 140 4-speed
65 Corsa 140 4-speed
66 Corsa 455 Toro V8
65 Monza 455 Toro V8
65 Monza 4DR 140 PG w/factory A/C
65 Monza 4DR EJ20T w/5-speed

User avatar
terribleted
Posts: 2094
Joined: Sun Apr 18, 2010 2:36 pm
Location: Atlanta, GA
Contact:

Re: LM rear seat riser/firewall sheetmetal

Unread post by terribleted » Fri Nov 17, 2017 10:53 am

azdave wrote:
Fri Nov 17, 2017 10:52 am
Plugging a hole where a V8 used to be?
His other post says rust.
Corvair guy since 1982. I have personally restored at least 20 Vairs, many of them restored ground up.
https://www.facebook.com/tedsautorestoration/

Located in Snellville, Georgia

66vairguy
Posts: 1363
Joined: Tue Dec 21, 2010 3:44 pm

Re: LM rear seat riser/firewall sheetmetal

Unread post by 66vairguy » Fri Nov 17, 2017 1:35 pm

The "riser" at the rear seat area was often "missed" by the painters at the factory and rusts out. Fortunately out West you usually just find surface rust.

I posted to him to contact the world's famous davemotohead who shipped Corvair sheet metal.

User avatar
MtnVairMike
Posts: 67
Joined: Mon Oct 24, 2016 11:31 am
Location: Black Mountain, NC

Re: LM rear seat riser/firewall sheetmetal

Unread post by MtnVairMike » Sat Nov 18, 2017 3:01 pm

Try this post on other forum. This guy is cutting up a complete LM

http://corvaircenter.com/phorum/read.ph ... msg-948422

Mike



Sent from my iPad using Corvair Forum mobile app
1966 Monza Convertible, 140HP-4 speed, Ermine White

corvairnorm
Posts: 57
Joined: Wed Feb 17, 2016 7:12 pm
Location: DeLand, Florida

Re: LM rear seat riser/firewall sheetmetal

Unread post by corvairnorm » Sun Nov 19, 2017 8:27 pm

I'm in Central Florida. I Have what you need real cheap if you want to come cut it out yourself. Norm
Norm Wright
Central Florida Corvair
Southeast Corvair Council
Corsa

63 Monza Convert
64 Spyder Convert
66 Corsa coupe-air conditioned

LilBlue66Corsa
Posts: 5
Joined: Wed Nov 15, 2017 5:41 am

Re: LM rear seat riser/firewall sheetmetal

Unread post by LilBlue66Corsa » Tue Nov 21, 2017 7:38 am

corvairnorm wrote:
Sun Nov 19, 2017 8:27 pm
I'm in Central Florida. I Have what you need real cheap if you want to come cut it out yourself. Norm
Norm, I'm interested in the part. I sent an e-mail with my contact info. Tried PM but it just sat in the "Outbox"

Ernie

LilBlue66Corsa
Posts: 5
Joined: Wed Nov 15, 2017 5:41 am

Re: LM rear seat riser/firewall sheetmetal

Unread post by LilBlue66Corsa » Tue Nov 21, 2017 9:54 am

A requested, here are pics showing seat riser and firewall rust. It was caused by a leaky rear window
Attachments
7508.jpeg
7511.jpeg
7513.jpeg
7515.jpeg
7521.jpeg
7523.jpeg

Post Reply

Return to “Parts Wanted”