SOLD! FOR SALE! Weber Carbs, Heads, Headers, Etc

[zarfnober]

I STILL HAVE ALL OF THESE PARTS FOR SALE AND PLAN ON BEING AT THE CENTRAL VIRGINIA CORVAIR CLUB EVENT TOMORROW, SATURDAY APRIL 26

1 Pair Weber 40IDA3C carbs, less than 2500 miles, only need a gasket set, mechanically perfect, I believe they're Italian made, can't be sure, as there's not a country of origin stamp, purchased new in early 91 or 92. All original factory jetting to my knowledge.
K&N Air cleaners, excellent, like new condition.
Linkage for carbs.
1 set bored and polished to 32mm chokes for Weber carbs.
Weber float level gauge
140 heads modded for VW piston/cylinders with big tube exhaust, new guides. These heads will need new seats, I'll provide details by phone or email, phone is preferred. I believe they were heat treated by Glenn Ziessness when I had the seats done. They have not been used since they were machined for the VW cylinders.
Corvair connection manifolds, one modified, one stock, you can finish mods yourself, or find another stock manifold, I have a line on new ones and will provide contact to buyer OR, you could have Michael LeVeque or one of the other Corvair specialists modify them by welding on tall runners and use the supplied carb bases.
Stainless steel valves, I've cleaned them up, nice and shiny, very dirty in photos.
Deep valve covers from The Shop, excellent, like new condition.
Harland Sharpe roller rockers with original polylocks, ARP Rocker Studs, original pushrod guides, LT-1 valve springs.
Rocker stud girdle, tall polylocks in photo are junk, they were machined incorrectly, I'll bring one so buyer can find a matching set.
OTTO headers with matching flanges welded on for big tube exhaust, VERY light surface rust, 1 small ding on each.
Top and side shrouds cut for Webers/manifolds.
1 set Sealed Power HT817R lifters New in box. Bought in 2001, have proper crown on them, not in photos.
1 solid engine mount, will include in package or available separately.

$5500 OBO Feel free to text me, it's easier than typing and takes way less time 434-987-2804 I WILL CALL RIGHT BACK! Sorry, but I get robo'd every day. I'd be willing to deliver within a reasonable distance of Barboursville, Va.

So, pretty much everything you need to convert to Webers for a big bore motor, I probably have the valve spring retainers somewhere, if found, I'll include them, but if I were to keep this setup, I'd get titanium retainers.

I also have a set of NEW Corvair rods with ARP bolts that Ken Hand has made, they are set up for the full floating pins. I may have a few other things to bring along.

Thanks!
Rocco Egizio

[zarfnober]

Webers, heads, headers, air cleaners etc. have been sold pending payment. Connecting rods are still available. Thanks!

Rocco Egizio

[zarfnober]

Payment received and shipping out today, thanks!