Seat extenders

The World's Largest Corvair Parts Supplier
Post Reply
JohnnyBoomBoom
Posts: 38
Joined: Tue Jul 24, 2018 9:45 am

Seat extenders

Post by JohnnyBoomBoom »

Any experience with installing the Clark’s seat extenders ?


Sent from my iPad using Corvair Forum mobile app
Top
User avatar
terribleted
Posts: 4584
Joined: Sun Apr 18, 2010 2:36 pm
Location: Atlanta, GA
Contact:
Contact terribleted

Re: Seat extenders

Post by terribleted »

Yes simple install, they are bolt in
Corvair guy since 1982. I have personally restored at least 20 Vairs, many of them restored ground up.
Currently working full time repairing Corvairs and restoring old cars.
https://www.facebook.com/tedsautorestoration/

Located in Snellville, Georgia
Top
User avatar
Danny Joe
Posts: 214
Joined: Fri Nov 14, 2014 7:02 pm
Location: Toney, Al (just outside Huntsville)

Re: Seat extenders

Post by Danny Joe »

A slight expansion on Ted's post, they bolt in using the original seat mounting holes.
'64 Spyder Convertible
'63 Rampside (to be Rotisseried)
Toney, Alabama (just outside Huntsville)
Top
skipvair
Posts: 248
Joined: Sun Apr 30, 2017 8:17 pm

Re: Seat extenders

Post by skipvair »

I found it easier if you put carburetor studs into the pre-tapped remounting holes in the rear for remounting the seats.


Sent from my iPhone using Corvair Forum mobile app
Frank Metasavage

65 Corsa 140 4 speed with Weber IDAs
66 Corsa 140 4 speed Stock
Top
Post Reply

Return to “Clark's Corvair Parts”