Scrapping Out A Van

All Models and Years
AlmostACorvair
Posts: 2
Joined: Wed Dec 16, 2009 4:24 am
Location: St. Petersburg, FL

Scrapping Out A Van

Post by AlmostACorvair »

Hello All,

I bought a 61' Panel Van (95 Model) last week as a parts vehicle. The body is pretty much shot to hell or I wouldn't even consider scrapping it out. I have stripped nearly every attached part off of it already and all that really remains is the chassis. All of the usual needed body parts (i.e rockers, doglegs, bottom panels) have intense rust issues. However, there are some usable panels on the upper and front parts of it. If someone is looking for a special section of sheet metal please PM me with a picture of what you are looking for and I will see if I can cut it out for you. Most of the stripped parts have been spoken for already. If someone wants the entire remaining body and lives in the Tampa Bay area, I will give it to you. I may even be able to deliver it locally. I will probably be sending the body to the salvage yard early next week. Please PM me if you have any requests.

Matt
St. Petersburg, FL
1963 Corvair 95 Panel Van
Matt
St. Petersburg, FL
63 Corvair 95 Panel Van
Danthesignman
Posts: 66
Joined: Wed Jan 20, 2010 5:53 pm

Re: Scrapping Out A Van

Post by Danthesignman »

Do You still have the instrument cluster ?
Jimbo
Posts: 166
Joined: Fri Jul 30, 2010 3:51 pm
Location: north middle tenn.

Re: Scrapping Out A Van

Post by Jimbo »

I have a INSTRUMENT CLUSTER if still needed. Jimbo
Post Reply

Return to “Ask your Mechanical Questions here”