new from belgium

[kjell]

hey ,

i am gunter live in belgium and own a 1966 corvair monza sedan ( 4 door ) powert with 110 hp engine and 4 speed manual
the only thing that is not easy is finding info of the car , vin info ...
the car is made in antwerp ( belgium ) so the vin decoders do not work for me
grtz gunter

[4carbcorvair]

Hi and Welcome!!!

If I remember correctly, all Corvairs were made in the US and shipped/exported. None were actually produced outside of the US. Unless your VIN has been changed, you can post up the VIN and all of the information on the Fisher Body Tag in the engine compartment. The VIN should be near the battery. The Fisher body tag will be on the rear cross-member near the tail lights.

[Vanman]

Welcome to CF. We are now officialy International!

[MonzaDave]

Hi and Welcome!!!

If I remember correctly, all Corvairs were made in the US and shipped/exported. None were actually produced outside of the US. Unless your VIN has been changed, you can post up the VIN and all of the information on the Fisher Body Tag in the engine compartment. The VIN should be near the battery. The Fisher body tag will be on the rear cross-member near the tail lights.

There were 696 CKD (Completely Knocked Down) cars exported for assembly abroad in 1965, and 432 in 1966. Gunter's is undoubtedly one of the 432.

[kjell]

this is my vin plate
and you can see it marks antwerpen

this car is 1 of the 196 4 door monza's that is assembled in antwerpen