Nice to meet you all!!!
My '64 Deluxe
102hp FC block
4 speed with 3:55 diff.
Bertha!!!
-
BerthaTheBurritoBus
- Posts: 4
- Joined: Thu May 09, 2024 4:14 pm
- Location: California
Bertha!!!
- Attachments
-
- Bertha
Re: Bertha!!!
Welcome! So what's the scoop on Bertha? New to you or had it a long time? How was it lowered?
Dave W. from Gilbert, AZ
66 Corsa 140/4 Yenko Stinger Tribute
66 Corsa 140 Coupe w/factory A/C
65 Monza 4DR 140/PG w/factory A/C
65 Monza 4DR EJ20T/5
64 Greenbrier 110/PG, Standard 6-Door
66 Corsa 140/4 Yenko Stinger Tribute
66 Corsa 140 Coupe w/factory A/C
65 Monza 4DR 140/PG w/factory A/C
65 Monza 4DR EJ20T/5
64 Greenbrier 110/PG, Standard 6-Door
-
BerthaTheBurritoBus
- Posts: 4
- Joined: Thu May 09, 2024 4:14 pm
- Location: California
Re: Bertha!!!
I got her in 2009 for $800. She was waist deep in dry dirt and tumbleweeds. Missing most all trim. cracked windshield. Needed Everything from wiring to brakes... The engine did run so I got about 10,000 miles on it and dropped a valve seat and overheated. And the wiring all fried up... So I did a top and rebuild And replace two pistons and an O-ring job.
Runs very well since then. She was a daily driver for about six years and I put at least 100,000 more miles on her.
I lowered her by Cutting 1.5 coils off the front and 1 coil off the back... I think
The list of people In the Corvair community that have helped me with her has been amazing!!! Love you guys!!
I took her on the Corsa West poppy run and it ran great.
Runs very well since then. She was a daily driver for about six years and I put at least 100,000 more miles on her.
I lowered her by Cutting 1.5 coils off the front and 1 coil off the back... I think
The list of people In the Corvair community that have helped me with her has been amazing!!! Love you guys!!
I took her on the Corsa West poppy run and it ran great.
- Attachments
-
-
BerthaTheBurritoBus
- Posts: 4
- Joined: Thu May 09, 2024 4:14 pm
- Location: California
Search CorvairForum
Calendar
Birthdays
Newest members
Corvair Vendors