hey guys, i have always wanted to see vairs run on the rollers! i have a great local shop that will host a day. current Rates are 80$ for 3 pulls.
it would be great to see what all these vairs make! i could even be provoked to put the honda power vair on the rollers
Mike D
Dyno day Bourne MA
Forum rules
Washington, Oregon, California, Nevada, Idaho, Montana, Wyoming, Utah, Arizona, Colorado, New Mexico, Alaska, Hawaii.
also Serving the Canadian provinces of Alberta, British Columbia, Northwest Territory, and Yukon. Baja California Mexico, and the continents of Asia and Australia
Washington, Oregon, California, Nevada, Idaho, Montana, Wyoming, Utah, Arizona, Colorado, New Mexico, Alaska, Hawaii.
also Serving the Canadian provinces of Alberta, British Columbia, Northwest Territory, and Yukon. Baja California Mexico, and the continents of Asia and Australia
-
- Posts: 89
- Joined: Wed Jul 16, 2014 6:39 pm
Dyno day Bourne MA
Honda B20 turbo powered corvair. Is it the first honda powered corvair out there?
-
- Posts: 887
- Joined: Thu Sep 26, 2013 2:42 pm
Re: Dyno day Bourne MA
Hmmmmm! I have a Clayton above ground dyno in the back yard. Maybe a we can draw in a few Corvairs and get this thing to make some bucks!
With enough, maybe a new paint job!!!!!!!!
With enough, maybe a new paint job!!!!!!!!
Jerry Whitt
ASE CERTIFIED MASTER TECHNICIAN
Retired
Hemet, Callifornia
65 Monza, purchased new
65 Corsa convertible
ASE CERTIFIED MASTER TECHNICIAN
Retired
Hemet, Callifornia
65 Monza, purchased new
65 Corsa convertible
- davemotohead
- Corvair of the Month
- Posts: 1178
- Joined: Tue Aug 10, 2010 10:37 pm
- Location: rosamond california
- Contact:
Re: Dyno day Bourne MA
Here is a Stock 140 a buddy and I built, at the wheels. right at 100 hp.
- Allan Lacki
- Posts: 755
- Joined: Sat Mar 13, 2010 3:06 pm
Re: Dyno day Bourne MA
Hi MikeDTuning, You might want to consider contacting your local chapters of CORSA to promote your dyno day. You can find them through the CORSA website at www.corvair.org Here's a direct link to the CORSA Chapter Locator web page....
https://www.corvair.org/index.php/compo ... =9&reset=1
https://www.corvair.org/index.php/compo ... =9&reset=1
Re: Dyno day Bourne MA
1962 rampside #3957