Corvair Forum

Tires is a good start I think as they are fairly old... Still in good shape but old. Guess I start with that... I think I will also check my engine mounts as I don't know how old they are. Thanks for the advice guys ! [emoji106] I had this happen when I was around 70mph. I first had the tires balanc...

Would probably look better with the roof removed... Like a 2 seater corvette... LoL

Sent from my SM-N975W using Corvair Forum mobile app

Guys anyone have experience with speed vibration...? It seams like my drive shafts aren't balanced or something. As soon as I go over 55 mph the hole car starts vibrating badly... Where should I start to check what it could be? Any suggestions are welcome. Thanks guys Sent from my SM-N975W using Cor...

Ya that wasn't easy but it's doable. I lowered the tank more on the passenger side opened the retainer clip ( I only have one on the passenger side above the tank ) took the old line out and reinserted the new line closed the retainer and the tank went back up didn't even have to push the filler cap...

I know I might get some heat for this but I only needed to drop the tank about 3 inches and the line slipped right out and back in... Went in no problem I disconnected everything the sender unit and all its probably safer that way as you don't bent or damage the fuel line. So my advice would be lowe...

That's a bummer but it is what it is... Thanks for all the tips. Away bar bushings are brand new but everything on the gas tank is old... So I guess I need to spend more money... [emoji24] Yes tank needs to come all the way out. The line runs all the way above the tank near the top of the vertical p...

So I changed the drivers side line with a problem went to bleed again and the passenger side is leaking as well... I'm cursing the guy that installed them all this because someone was to lazy to push the grommet in properly... Now to change the passenger side does the tank have to come completely ou...

I guess that's good news... I'll probably order both left and right front to be save ! Are the lines from Clark's pre bent or do I need to bend them? the line to the left front can be changed with the tank in the car. The line to the right front requires removing the tank to change. Be sure when you...

Ok so I got the new dual MC installed... See pictures... But when we went to bleed the brakes we discovered that where the two front lines run through the fire wall we had a big hole that was probably the the bigger leak... See picture. The grommet was there but it was just sitting infront of the fi...

Hey I got one more question the brake line nuts are imperial not metric right... Got to buy myself a set of flare nut wrenches... So I don't strip anything... Also what size clear hose is good for bleeding the brakes ? Thanks in advance ! That bender is useful in this case to help unbend the existin...

Thanks for the tips that tube bender looks good it should make it a bit easier... I will only bend it a little bit at the time...! Thanks again very helpful advise! Thanks guys with all the helpful advice... I will go with the Clark's Corvair kit as I don't really use the trunk for anything... Might...

Thanks guys with all the helpful advice... I will go with the Clark's Corvair kit as I don't really use the trunk for anything... Might even make a cover for the MC so it won't get hit. I'm pretty good with that sort of thing. Now I have to bend the line under the dash a bit as you guys describe. If...

Thanks guys yes I'm considering doing the switch now that you guys mentioned it. It just makes sense. My cylinders on the brakes look fairly new so I'm not worried about them. I looked for the conversion kit but I can't find it on Clark's could you point me in the right direction? Also what's the be...

65 Monza 110 Discovered yesterday that my brake pedal dropped to the floor checked the Reservoir and it was empty... Looked at my pedal assembly and saw that cylinder is leaking under my carpet... Found the replacement on Clark's Corvair but not sure what else I need there is the new reservoir and a...

First of we have been enjoying our Corvair greatly this summer it was a blast cruising around with the whole family. Maybe we get a couple more days out of this year...  So to my question yesterday I went for a drive about 20km or so on my way back I stopped at a store. When I went back on the road ...

Thanks guys I don't see a leak ? Could it be in the connector of the cable ? Sent from my SM-N975W using Corvair Forum mobile app