Search found 12 matches

by 64von
Wed Sep 09, 2020 4:14 pm
Forum: Articles covering the 1960 - 1964 Models
Topic: Got a miss
Replies: 9
Views: 2410

Re: Got a miss

IMG_0201.JPG
This is the distributor. The miss was there before I put in the new hei distributor the same as it is now


Sent from my iPhone using Corvair Forum mobile app
by 64von
Wed Sep 09, 2020 10:36 am
Forum: Articles covering the 1960 - 1964 Models
Topic: Got a miss
Replies: 9
Views: 2410

Re: Got a miss

Has new wires and plugs and a brand new electronic distributor. Yes if you hold it a little above an idle is when you get the sputter.


Sent from my iPhone using Corvair Forum mobile app
by 64von
Wed Sep 09, 2020 8:14 am
Forum: Articles covering the 1960 - 1964 Models
Topic: Got a miss
Replies: 9
Views: 2410

Re: Got a miss

Thanks for the info vairguy. I only have single exhaust. May check with a heat gun


Sent from my iPhone using Corvair Forum mobile app
by 64von
Tue Sep 08, 2020 7:06 am
Forum: Articles covering the 1960 - 1964 Models
Topic: Got a miss
Replies: 9
Views: 2410

Got a miss

Good morning
I have a 1964 with a miss. Rebuilt carburetors , brand new electronic ignition and each cylinder has 100-120 psi You don’t notice it at idle but when you rev it up you can hear it. Thanks in advance


Sent from my iPhone using Corvair Forum mobile app
by 64von
Sat Jun 27, 2020 5:06 am
Forum: Member's Rides, Projects, and Builds
Topic: ‘63 Spyder Convertible
Replies: 103
Views: 26417

Re: ‘63 Spyder Convertible

Very nice. And good luck with the restoration. Love the early models


Sent from my iPhone using Corvair Forum mobile app
by 64von
Thu Jun 25, 2020 4:48 am
Forum: Member's Rides, Projects, and Builds
Topic: Corvair Lakewood 61 - NL
Replies: 552
Views: 126422

Re: Corvair Lakewood 61 - NL

Very nice job


Sent from my iPhone using Corvair Forum mobile app
by 64von
Wed Jun 10, 2020 6:26 pm
Forum: Ask your Mechanical Questions here
Topic: head gasket
Replies: 8
Views: 935

Re: head gasket

GOOD EVENING Good news with a good compression tester compression is good . So I toke the carb apart and blew it all out and set float. It was ok any way. Now when you put your hand over the carb it makes a difference in the way it idols. the engine pulls down. But I still have a miss under a load. ...
by 64von
Wed Jun 10, 2020 6:05 am
Forum: Ask your Mechanical Questions here
Topic: head gasket
Replies: 8
Views: 935

Re: head gasket

The compression tester I was using was junk so I have another and am going to try it this week sometime. No more leakage than I am getting back through the tubes I would say it is normal leakage. I did the pressure test and nothing coming out of the intake or exhaust nothing that you can hear from t...
by 64von
Wed Jun 10, 2020 3:02 am
Forum: Ask your Mechanical Questions here
Topic: head gasket
Replies: 8
Views: 935

Re: head gasket

So I put ATF fluid on top of the cylinder to help find where it was leaking. So when I pressurized the cylinders with 75-100 PSI of compressed air I assume some was leaking by the pistons and turning into mist and coming back out the push rod tubes. A little not
by 64von
Tue Jun 09, 2020 5:53 pm
Forum: Ask your Mechanical Questions here
Topic: head gasket
Replies: 8
Views: 935

Re: head gasket

HELLO I was asked to give some back ground . So am 59 years old I live in Missouri. I have been in industrial maintenance my whole adult life. I am currently a maintenance manager for a large factory . I recently purchased a 1964 two door Corvair with 3700 original miles I believe to be true. I got ...
by 64von
Mon Jun 08, 2020 6:39 pm
Forum: Ask your Mechanical Questions here
Topic: head gasket
Replies: 8
Views: 935

head gasket

I bought a 1964 with 37000 actual miles I believe to be true. I had a miss issue at any thing more than idle. I pulled plug wires off one at a time and found that all three cylinders on the right when I pulled the wires didn't make much difference to the way it idled. did a compression check and had...
by 64von
Mon Jun 08, 2020 6:29 pm
Forum: Introductions
Topic: New to forums
Replies: 18
Views: 1917

Re: New to forums

Hello every one new to Corvair ownership I bought a beautiful 1964 2 door coupe I will be posting some tech questions Thanks for having this Forum

Go to advanced search