Corvair Forum

Thanks for the help . Jerrry

I guess that means I need to remove the transmission. Thanks for your help>>>>>>Jerry

Yes I have already tried Trans-X. Also I should mention that the car was blocked up and as I went through the gears R-N-D the idle increase a little but when I went to L the idle went way up?????Thanks Jerry

I have included both the readings and what the book says they should be in hope some one can make a suggestion about what the problem could be. Thanks Jerry

Probably means I need to rebuild the transmission. Jerry

Here are the Front Pump in PSI. The top one is at idle and the bottom one is at idle with no vacuum . The reading of 200psi in reverse is a guess my gauge only up to 160 and it pegged out. I have no idea what it all means but maybe some can help. Thanks Jerry

Tanks for the pictures I got the front pump it looks like it is a 5/16" by 18 threaded connection. Thanks a bunch Jerry

I thanks you for the information I have look at it but still don't know where the 2 ports are for checking the pressure. I assume you do not have to take anything apart to assess the ports???? Thanks Jerry

Afraid I did not understand your reply. I am looking for the location of the ports to check the pressures. Thanks Jerry

I wanted to check the front pump and throttle valve pressures on my 1966 Corvair with automatic transmission. I am not sure where the ports are located to check the psi. Is it in the rear toward the front of the car or where. I have enclosed a picture of the rear, Thanks for any help. Jerry Corvair ...

Good thanks for the info. Sound like too much to consider. Thanks Jerry

I have a 1966 Corvair with a automatic transmission and wondering how difficult it would be to change it to a 4 speed standard transmission? Thanks for any help Jerry

Thanks and I am retired and I like to do this as a hobby. Jerry

very good thanks for the detail description. Again Thanks...Jerry

I have a 1966 Corvair convertible and replacing the vent window outer frame, I have 2 pictures of it I don't know how clear they are. What I wanted to know is do I need to remove the vent window to replace it? Thanks Jerry

I would be interested in your vent window frame, What is the price you want for both and I have ordered from California Corvair but maybe I could cancel if it is not too late. Thanks Jerry