Search found 34 matches

by lalkie01
Thu Oct 01, 2020 3:20 pm
Forum: Ask your Mechanical Questions here
Topic: Stinger Distributor
Replies: 4
Views: 304

Re: Stinger Distributor

Thanks I have purchased the proper linkage. Larry
by lalkie01
Thu Aug 27, 2020 4:47 pm
Forum: Ask your Mechanical Questions here
Topic: Stinger Distributor
Replies: 4
Views: 304

Stinger Distributor

I have 65 Corsa and am looking at replacing the distributor. Apparently I need a the secondary pivot bracket off a 66 4 carb engine. What exactly does the different 66 secondary pivot bracket do? Does it raise the linkage so it does not interfere. Does it set the linkage father back? I would appreci...
by lalkie01
Sun Jul 26, 2020 8:36 am
Forum: Ask your Mechanical Questions here
Topic: Pro Series Distributor
Replies: 27
Views: 1543

Re: Pro Series Distributor

I ran the car today with the vacuum advance off the distributor and the vacuum line plugged. It had very little surging and ran better at higher rpm's. It appears as if I need to replace the distributor and will probably go with the stinger unit based on the last post by brodie52. There is a lot of ...
by lalkie01
Sun Jul 26, 2020 4:26 am
Forum: Ask your Mechanical Questions here
Topic: Pro Series Distributor
Replies: 27
Views: 1543

Re: Pro Series Distributor

The plate on the distributor moves easily when the engine is not running. The vacuum canister seems to work well but can't move the plate when suck on it or when the engine sucks on it while connected to the plate. I will continue checking to find the problem. The canister is relatively new. The pla...
by lalkie01
Sat Jul 25, 2020 5:25 pm
Forum: Ask your Mechanical Questions here
Topic: Pro Series Distributor
Replies: 27
Views: 1543

Re: Pro Series Distributor

I was able to check my distributor plate today. I could not get it to move while sucking on the vacuum line. I hooked the vacuum line up and increased engine speed and there was no movement. The vacuum at the increased speed was about 12 to 13 pounds. Elevation is 4500 where I live. I pried the vacu...
by lalkie01
Sat Jul 25, 2020 10:34 am
Forum: Ask your Mechanical Questions here
Topic: Pro Series Distributor
Replies: 27
Views: 1543

Re: Pro Series Distributor

Thanks again. I really appreciate the information. I hope other can use it too. Larry
by lalkie01
Sat Jul 25, 2020 7:10 am
Forum: Ask your Mechanical Questions here
Topic: Pro Series Distributor
Replies: 27
Views: 1543

Re: Pro Series Distributor

Will my tach work with the stinger distributor?
by lalkie01
Sat Jul 25, 2020 7:00 am
Forum: Ask your Mechanical Questions here
Topic: Pro Series Distributor
Replies: 27
Views: 1543

Re: Pro Series Distributor

Thanks for all the information. It hope it helps others. I haven't had a chance to check the plate in my distributor. I am now leaning toward a stinger distributor. Thanks Again. Larry
by lalkie01
Fri Jul 24, 2020 11:49 am
Forum: Ask your Mechanical Questions here
Topic: Pro Series Distributor
Replies: 27
Views: 1543

Re: Pro Series Distributor

The stinger distributor requires a electronic box outside the the distributor. The pro series does not require an external box. I am thinking about replacing the plate in the distributor but would need to check the distributor to see that it is in good shape. I find it unusual that a distributor wou...
by lalkie01
Fri Jul 24, 2020 5:27 am
Forum: Ask your Mechanical Questions here
Topic: Pro Series Distributor
Replies: 27
Views: 1543

Re: Pro Series Destributor

A pro series distributor is an electronic distributor that cost $130.00 listed as a R2R on a number of sites on the net.It does not require a secondary electronic box. Can't seem to find anyone that has purchased one for a corvair. Just looking for someone that has tried one. Larry
by lalkie01
Thu Jul 23, 2020 5:41 pm
Forum: Ask your Mechanical Questions here
Topic: Pro Series Distributor
Replies: 27
Views: 1543

Re: Pro Series Destributor

The harmonic balancer looks good. The carbs are not leaking nor can I find a vacuum leak. The secondary carbs are closing all the way. I am using points as my crane 700 failed. I replaced the coil at the stock location as it failed. The vacuum advance line is connected to the right rear carb upright...
by lalkie01
Thu Jul 23, 2020 12:39 pm
Forum: Ask your Mechanical Questions here
Topic: Pro Series Distributor
Replies: 27
Views: 1543

Re: Pro Series Destributor

Thanks for the info. I have the-carb version and having trouble with surging. I can't find a vacuum leak and have checked the float level in the carbs. I have the timing advanced about .75 inches past the end of the timing marks. This has helped with the surging at 2000 rpm in first and second. I ha...
by lalkie01
Thu Jul 23, 2020 4:23 am
Forum: Ask your Mechanical Questions here
Topic: Pro Series Distributor
Replies: 27
Views: 1543

Pro Series Distributor

I am looking for reviews and information on the pro series distributor for my 65 corsa. Also information on the electronic distributor clarks sells. Any help would be appreciated.
Thanks Larry
by lalkie01
Wed Jul 01, 2020 2:46 am
Forum: Ask your Mechanical Questions here
Topic: Corsa Speedometer
Replies: 5
Views: 380

Re: Corsa Speedometer

Thanks for the help. It looks like if i want the speedometer to work i will have too throw some money at it. Thanks again. larry
by lalkie01
Tue Jun 30, 2020 12:45 pm
Forum: Ask your Mechanical Questions here
Topic: Corsa Speedometer
Replies: 5
Views: 380

Re: Corsa Speedometer

The odometer on my corsa is not working and I thought i could replace it with a monza speedometer. Either that or take the parts from a good monza speedometer and fix my corsa. I didn't want to spend $200.00 to get my repaired but I may have to. Still looking at options. I need to check to see if th...
by lalkie01
Mon Jun 29, 2020 4:36 am
Forum: Ask your Mechanical Questions here
Topic: Corsa Speedometer
Replies: 5
Views: 380

Corsa Speedometer

Is the corsa speedometer the same diameter as a non-corsa speedometer. Thanks Larry

Go to advanced search