Search found 155 matches

by my65
Thu Mar 16, 2023 2:38 pm
Forum: Ask your Mechanical Questions here
Topic: Backup switch
Replies: 19
Views: 1302

Re: Backup switch

Thanks for the input. I bought a new Clarks switch today and will hold on to my defective one to see if I can use a adapter?? If it works out, I will post.
by my65
Mon Mar 13, 2023 4:53 pm
Forum: Ask your Mechanical Questions here
Topic: Backup switch
Replies: 19
Views: 1302

Re: Backup switch

Thanks for your response! Did you write down any info from your switches?? The only info I can see is the partial number between terminals. The PO cut off the daul plug for the round terminals and attached individual spade type connectors.
by my65
Mon Mar 13, 2023 2:21 pm
Forum: Ask your Mechanical Questions here
Topic: Backup switch
Replies: 19
Views: 1302

Backup switch

8A4B1CEE-6D6E-44CC-BAFE-5AB835C798D9.jpeg I am putting my 66 Corsa back together and when I connected the wiring harnesses, the heater fuse opened up. The wire coming from the fuse block to the harness was disconnected and was found to be shorted. The heater resistor was disconnected and had no imp...
by my65
Sat Sep 03, 2022 7:47 am
Forum: Ask your Mechanical Questions here
Topic: Instrument cluster repair
Replies: 6
Views: 491

Re: Instrument cluster repair

Thank you both for the great input!! :not worthy: :not worthy: When I did my 65 Monza, I put Seth’s tack in the center hole….love it!!! The only item that is not working in the cluster, is the trip odometer. I am just starting the body work (4-5 months ) so I have time to research your ideas. My car...
by my65
Fri Sep 02, 2022 10:32 am
Forum: Ask your Mechanical Questions here
Topic: Instrument cluster repair
Replies: 6
Views: 491

Instrument cluster repair

I am now working on my 66 Corsa and have completed to engine, transaxle, transmission repairs and moving on to the body / interior. It’s all out and I would like to check the instruments out prior to reinstalling the cluster panel in the dash. Is there a company that you can suggest or give me a pro...
by my65
Tue Jun 14, 2022 6:12 pm
Forum: Ask your Mechanical Questions here
Topic: Crank key indexing
Replies: 1
Views: 217

Crank key indexing

I have a late original 8409 crankshaft that the cam drive gear is positioned retarded a huge amount. The shaft key way was cut at 60 degrees retarded. Normally the #1 crank pin the balancer key way and gear key way all line up. Has anyone ever seen this happen on a stock crank??
by my65
Fri Apr 08, 2022 1:56 pm
Forum: Ask your Mechanical Questions here
Topic: Compression unbalance
Replies: 5
Views: 533

Re: Compression unbalance

Thanks for your reply. Your Corsa looks a lot like my 65 except mine is a Monza 900.
by my65
Fri Apr 08, 2022 5:54 am
Forum: Ask your Mechanical Questions here
Topic: Compression unbalance
Replies: 5
Views: 533

Compression unbalance

I am now refreshing the 66 Corsa I purchased a few months back. I have the front suspension out and all the bushings, shocks, and ball joints replaced. Last week I pulled the powertrain out and yesterday separated the transmission, transaxle and removed the sheet metal off the engine. The motor was ...
by my65
Thu Feb 17, 2022 6:57 pm
Forum: Ask your Mechanical Questions here
Topic: Shifter tube
Replies: 6
Views: 612

Re: Shifter tube

Engine is still in the body. I will start taking it out in the next few weeks. I will inspect transmission and motor mount after power train in on my work table. I know something is worn out or miss aligned due to the shifting tube almost hanging below the tunnel. Thanks for you input
by my65
Tue Feb 15, 2022 8:19 am
Forum: Ask your Mechanical Questions here
Topic: Shifter tube
Replies: 6
Views: 612

Re: Shifter tube

Thanks for your reply and the link to your Corsa’s repairs. I will continue to dismantle
the power train and will check out the transmission mounts and shifter rod when they are out of the car.
My65 Monza looks similar in color to your Corsa
by my65
Sun Feb 13, 2022 3:27 pm
Forum: Ask your Mechanical Questions here
Topic: Shifter tube
Replies: 6
Views: 612

Re: Shifter tube

Pictures did not attach
by my65
Sun Feb 13, 2022 3:22 pm
Forum: Ask your Mechanical Questions here
Topic: Shifter tube
Replies: 6
Views: 612

Shifter tube

I am starting the reworking of my 66 Corsa stating from the bottom up. The front suspension has been remove, the bushing and ball joint removed and it currently is at the blaster for cleaning and prime. Now I am moving towards the back and got stumped at the tunnel exit. The gas linkage and shifter ...
by my65
Mon Nov 29, 2021 9:11 am
Forum: Ask your Mechanical Questions here
Topic: Rear wheel hubs
Replies: 2
Views: 295

Re: Rear wheel hubs

Thanks for your help!
by my65
Fri Nov 26, 2021 11:15 am
Forum: Ask your Mechanical Questions here
Topic: Rear wheel hubs
Replies: 2
Views: 295

Rear wheel hubs

I want to rebuild my spare 65 hubs and install them in my 66 next year. Every thing is the same except, 🤔 the bolts that hold the covers for the universal joint. Why?? Can I use the 1/4-20 or do I need to retap hub to 5/16-24 and open up holes in cover?? :dontknow:
by my65
Sat Oct 02, 2021 3:00 pm
Forum: Ask your Mechanical Questions here
Topic: Lower A arm bushing
Replies: 5
Views: 461

Re: Lower A arm bushing

Thanks!!! I will start dismantling the front suspension on Monday!! :not worthy:
by my65
Fri Oct 01, 2021 11:02 am
Forum: Ask your Mechanical Questions here
Topic: Lower A arm bushing
Replies: 5
Views: 461

Lower A arm bushing

I need to replace the bushing ( Clarks C957 ) but do not want to remove the complete lower A arm from the car. The car is on a two post lift and I was wondering if anyone has replace the bushing with the spring, shock, ball joint and control rod still attached???

Go to advanced search