Corvair Forum

'67 Vette, I'm jealous!

Words can't express my sorrow for your buddy, let's all get behind and do what we can....

I'm putting new carpet in my car / I always seem to have a problem cutting out the holes for the seat bolts, seat belt bolts, etc. I end up hacking at the carpet with a xacto knife - and - the result is usually pretty ugly. So - any suggestions on how to measure, cut and fit these holes? I'm sure so...

I tape a penny to my index finger and use that to press the disengage button.

A couple weeks ago I tossed my first belt. It was on a surface street so I was able to pull over, put it back on, and continue. I've since put a new OTTO belt on and things have been fine. What I'm finding now however is that my "Corvair driving experience" has been severely degraded becau...

I :goodpost: Correct, 180 "cold side", 150 "hot" side. As stated, spools up earlier. Also, added an autometer air to fuel ratio meter and am in the middle of playing with the metering rods .. the R1/r2/R32 Blackhawk engineering rods that Clarke's sells. Seems for me the r2 is the...

Vairguy / I'll get that for you this weekend / sorry I didn't see your post earlier - Andy.

On foxnews just now / do we know who this is?

http://www.foxnews.com/auto/2017/06/16/ ... -town.html

I agree w/ '66vairguy' - run a cable from the back to the front using a large gauge wire - then use a harness to connect. I used the following harness as it allowed my "stock" harness to remain un-altered in case I wanted to set it back to stock. works great, and it was only a saturday mor...

Thanks '66' - already ordered two "Otto" belts from Clark's. Too bad they're on the "other coast"

Thanks Danny, sounds like good advice. I also see many post saying spray the belt with silicon.

For the autometer unit you can purchase a longer cable designed for rear engine cars: This wiring harness which is longer: AutoMeter 5252 Wide Band Wire Harness

Thanks Brad / I probably should have mentioned it's a '65 Corsa Turbo. May have been my own doing as I was trying to see how much boost I could get out of the turbo - and - had to back off quickly a couple of times as I heard detonation. I plan on retarding the timing a little tomorrow to see if tha...

Well, I guess I'm not immune - out for a test drive when I suddenly hear a whining sound like a spooling turbo. Was on freeway and really couldn't stop,wasn't too worried as fan idiot light remained off and temp was normal. Thought perhaps turbo was having an issue, but back in garage saw the belt h...

I got this one from Autometer: Part # 4379

and

This wiring harness which is longer: AutoMeter 5252 Wide Band Wire Harness

Anything by REO Speedwagon....