Corvair Forum

Thanks a lot for the info. I guess ill.just go.with the correct year linkage.

Sent from my SM-G930V using Corvair Forum mobile app

Hey Gang. Wanting to invest in the Roger Parent linkage for my '69 Monza 140/4. I've heard it's a great set up, and to go with the '65 version and get rid of those choke lock outs. Any opinions good, or bad??? Excited to get all he slop out of the original linkage, and to have more precise throttle ...

Thanks

Sent from my SM-G930V using Corvair Forum mobile app

So putting things back together and I'm second guessing myself on the clutch fork. 1. Do you completely compress the spring and slide it threw, on the back of the bearing??? OR 2. Do the spring tabs go on the outside of the back of the bearing??? Hope i'm explaining well enough for someone to unders...

Would the crank seal spacer be part# C5311 for Clarks?? Also I don't see the sleeve available. Only for the pulley end, not the bell housing end.
Thanks

Thanks again...you guys are great. My Dad has had this car since I was 14. He never did anything but drive it and enjoy it, always had the maintenance done. Now i'm 44 and want to do things Right Myself.

Thank you all for the tips. Yes leaking from the weep hole. and also yes a new viton seal. No I did not use grease. was unaware that that was necessary. So if I use the spacer sound I get a new seal as well?? would anyone recommend NOT using a viton?? Ugh guess I'm off to pull this powertrain AGAIN.

Hello everyone. '69 Monza Vert. 140/4. I had some major oil leaks for a while now. Decided to take care of things this winter (finally). So, dropped the engine and trans axle, separated the two to find oil everywhere. Clutch and flywheel soaked. So bad that it actually built up like grease. So, took...

Going to change out the oil pan on my '69 140/vert from original to the Clark's pan. Just looking for any tips or suggestions. Type of gasket and why? Torque specs, and order? Any Locktite or sealent on the bolts? Thanks in advance.

thanks will do

Alright looking at a '68 Monza vert 110. It's a solid car and all there even though it's all apart. current owner was in the process of restoring,and unfortunately now is under the care of Hospice with not much time left. So that being said the wife is selling everthing. My only problem with the car...

Ok, have a '69 Monza/vert 140. Recentl found out it has the wrong 140 emblem on it, you know on the rear deck lid. So did some research in the old Clark's catalog and found that yes '65s have thier own 140 emblems, and '66--'69s have the one with the 2 raised checked flags. So I bought the right one...

Hi guys, Ok rebuilding the front end of a ,69 convertable. My question is, what is the best trick to getting the inner lower rubber bushings on. Grease, WD40???

Thanks for the info. Looks like I'll be going with the kit. I'll have to let you know how it goes in the spring.

Hi everyone, Planning on rebuilding the suspension on my '69 Monza Vert early this spring. Replaceing the cross member and all. Found this package deal on Ebay. Was wondering if anyone else has seen this and what you thought. Seems like a nice package for the price and a lot less then Clark's. But t...

Thanks for the reply great info on that web page. I printed one out it will come in handy when shopping. Thanks