LM Instrument Gauge Checkout Procedures

[Lane66Monza]

Quite awhile back, I needed to confirm the 2 sets of Corsa gauges I have were operating properly. I also had a friend ask me to rebuild his Corsa instrument panel, so an immediate need to check all these gauges was apparent. I searched Vair documents and the Internet and found limited info on how to check them on my garage bench. So, I had to develop attached procedures and test leads to function check each gauge.

This info can be used to Check Monza gauges. I think that EM gauges could also be checked with these procedure, but I have not had a EM Instrument panel to verify. So if anyone uses the procedures for an EM gauge checkout, I have the MsWord document to send you to make changes to for making a EM gauge checkout procedure.

I hope this info is helpful to members of this forum. I also made up a 2 additional sets of leads for other Vair owners looking to do the same for their cars.

Procedures

LM Corvair Gauge Checks.pdf

(379.42 KiB) Downloaded 13 times

Test Leads

LM Instruments Bench Test Leads.pdf

(679.01 KiB) Downloaded 11 times