Any experience with installing the Clark’s seat extenders ?
Sent from my iPad using Corvair Forum mobile app
Seat extenders
- terribleted
- Posts: 4584
- Joined: Sun Apr 18, 2010 2:36 pm
- Location: Atlanta, GA
- Contact:
Re: Seat extenders
Yes simple install, they are bolt in
Corvair guy since 1982. I have personally restored at least 20 Vairs, many of them restored ground up.
Currently working full time repairing Corvairs and restoring old cars.
https://www.facebook.com/tedsautorestoration/
Located in Snellville, Georgia
Currently working full time repairing Corvairs and restoring old cars.
https://www.facebook.com/tedsautorestoration/
Located in Snellville, Georgia
Re: Seat extenders
A slight expansion on Ted's post, they bolt in using the original seat mounting holes.
'64 Spyder Convertible
'63 Rampside (to be Rotisseried)
Toney, Alabama (just outside Huntsville)
'63 Rampside (to be Rotisseried)
Toney, Alabama (just outside Huntsville)
Re: Seat extenders
I found it easier if you put carburetor studs into the pre-tapped remounting holes in the rear for remounting the seats.
Sent from my iPhone using Corvair Forum mobile app
Sent from my iPhone using Corvair Forum mobile app
Frank Metasavage
65 Corsa 140 4 speed with Weber IDAs
66 Corsa 140 4 speed Stock
65 Corsa 140 4 speed with Weber IDAs
66 Corsa 140 4 speed Stock