A place to preserve the past, present and future of the Corvair. An ever evolving knowledge base made up of Corvair Enthusiasts from all over the world. (Note: no ads for logged in members). https://www.corvairforum.com/forum/
WOW! If I knew they made Covair amps, I would've bought one!!
I'm in the process of installing a Kicker sub, two rear speakers, Kicker front speakers, and an amp to bring the noise!!
Looking good Scott!
Re: 1960 Monza Coupe
Posted: Thu Feb 02, 2023 6:59 pm
by erco
Jeez, you may have to air cool those thrusters!
I suppose you wouldn't be interested in this vintage 40W Audiovox "Sound Exploder"...
Re: 1960 Monza Coupe
Posted: Sun Feb 12, 2023 3:13 pm
by Scott H
erco wrote: ↑Thu Feb 02, 2023 6:59 pm
Jeez, you may have to air cool those thrusters!
I suppose you wouldn't be interested in this vintage 40W Audiovox "Sound Exploder"...
AVX.jpg
I have an nos one lol
Re: 1960 Monza Coupe
Posted: Sun Feb 12, 2023 6:34 pm
by Scott H
Took the car to the first show of the year yesterday. The Dr. George Car Show. Great show. Great weather.
Re: 1960 Monza Coupe
Posted: Sun Feb 12, 2023 6:38 pm
by Scott H
Amps in and speaker box upholstered. Then I had to remove the amps and reinstall the old amp. Tested the system. 107.9 Decibels! New amps may go back in. Not sure yet.
Re: 1960 Monza Coupe
Posted: Sun Feb 12, 2023 7:33 pm
by doug6423
Are the amps mounted in the front in the spare tire well? Just want to confirm.
Mine is cutting out when I rev the engine. Order a new condensor that mounts on the voltage regulator to see if that fixes it.
Re: 1960 Monza Coupe
Posted: Wed Feb 15, 2023 11:00 pm
by Scott H
doug6423 wrote: ↑Sun Feb 12, 2023 7:33 pm
Are the amps mounted in the front in the spare tire well? Just want to confirm.
Mine is cutting out when I rev the engine. Order a new condensor that mounts on the voltage regulator to see if that fixes it.
Yes they are in the trunk.
Re: 1960 Monza Coupe
Posted: Thu Feb 16, 2023 2:59 pm
by doug6423
Found out the cutting out issue was the voltage regulator. All good now!
Re: 1960 Monza Coupe
Posted: Tue Mar 14, 2023 5:25 pm
by Scott H
doug6423 wrote: ↑Thu Feb 16, 2023 2:59 pm
Found out the cutting out issue was the voltage regulator. All good now!
Re: 1960 Monza Coupe
Posted: Tue Mar 14, 2023 5:26 pm
by Scott H
I had DazzlaRock draw my car for me. I added it to a CorvairForum Poster. I love it!
60dzr lowres.png (198.03 KiB) Viewed 1385 times
Re: 1960 Monza Coupe
Posted: Wed Mar 15, 2023 11:32 am
by doug6423
That is cool!!
Re: 1960 Monza Coupe
Posted: Thu Jul 27, 2023 7:32 pm
by Scott H
New exhaust. It’s so much more fun to drive now!
Short video -
Re: 1960 Monza Coupe
Posted: Fri Jul 28, 2023 7:28 am
by Scott H
I haven’t added any pictures in awhile. Here’s some new ones.
Re: 1960 Monza Coupe
Posted: Fri Jul 28, 2023 4:38 pm
by doug6423
I don't blame ya for showing it off, it's a good looking car!!
And love the graphic stuff you keep coming up with, especially the 'Straight Outta Willow Run'!
Re: 1960 Monza Coupe
Posted: Sat Jul 29, 2023 2:31 pm
by Project65
Looking great! ‘Tis the season to get out there and enjoy the ride!
Re: 1960 Monza Coupe
Posted: Mon Sep 18, 2023 1:57 pm
by Scott H
Currently have the car tore apart. I’m finally working on the suspension and brakes. I’m replacing the ‘60 suspension with suspension from a 1964. While I’m at it I’m installing the new fuel tank I bought from Clark’s. I’m trying to get it all done before a couple October shows I want to make it to. So I’m only doing the front suspension now. The rear will have to wait until after the fan belt toss.