Help with decoding my '66 Monza

Got a Body Tag that needs decoding? Post it here.
User avatar
reedbecky
Posts: 18
Joined: Sat Dec 31, 2011 4:52 pm
Location: Minnesota

Help with decoding my '66 Monza

Post by reedbecky »

Could I please get some help decoding the body tag on my '66 Monza ragtop? I couldn't take a picture since the building it is in is unpowered and the flash washes out the picture. The tag reads as follows: O2D E
ST 66-10567 WRN 5936 BODY
    TR 758 C-2 PAINT
    • WD2EM4F
    User avatar
    Corvair.crazy
    Corvair of the Month
    Corvair of the Month
    Posts: 966
    Joined: Fri Nov 26, 2010 8:22 am
    Location: McMinnville, Oregon

    Re: Help with decoding my '66 Monza

    Post by Corvair.crazy »

    Well if I am reading that correctly; Built in Willow run, W = RPO A02 Tinted Windshield only, D = RPO C06 Power Top (Manual top standard, no indicator), 2= airconditioning, power glide trans; 4=F = Remote outside mirror / updated CC group (lighting grp, door guards)

    65-67 Corvairs. Interior paint code is located at the top right corner of the late model bodytag. Do you know what number that is?

    Exterior paint is saddle with black top.
    Jon
    CORSA member
    1962 Spyder convert
    1961 Rampside
    User avatar
    reedbecky
    Posts: 18
    Joined: Sat Dec 31, 2011 4:52 pm
    Location: Minnesota

    Re: Help with decoding my '66 Monza

    Post by reedbecky »

    Thanks for the info about the Monza! The car is original and the tag verifies that. The car is pictured in my ID and I hope to have it on the road this summer. I think the car is Lemonwood Yellow, the only thing in the right corner is an E and next to where it says paint is C-2. I am so glad I joined this forum since it has helped me a lot with deciding how I wanted to restore my Monza. The members here have a lot of knowledge and are very supportive of each other. Thanks again, Reed
    User avatar
    Corvair.crazy
    Corvair of the Month
    Corvair of the Month
    Posts: 966
    Joined: Fri Nov 26, 2010 8:22 am
    Location: McMinnville, Oregon

    Re: Help with decoding my '66 Monza

    Post by Corvair.crazy »

    Nicely optioned car. We are glad you joined the forum.
    E makes sense that means your interior is black. C=saddle as far as the exterior goes.
    Jon
    CORSA member
    1962 Spyder convert
    1961 Rampside
    Post Reply

    Return to “Body/VIN Tag Decoding”